User manual SMEG SBA1

[. . . ] • Young children should be supervised to ensure that they do not play with the appliance. • Never rest metallic objects such as knives, forks, spoons and lids on the appliance during use. • Never try to put out a fire or flames with water: turn off the appliance and smother the flames with a fire blanket or other appropriate cover. • Have qualified personnel carry out installation and assistance interventions according to the standards in force. [. . . ] Programmed cooking is the function which allows a cooking operation to be stopped at an established time depending on the time set by the user, after which the oven will switch off automatically. After selecting a function and a cooking temperature, press the control knob to set the cooking time. Turn the control knob to add some minutes of cooking time. The appliance will resume its normal operation with the previously selected cooking settings. Modifying the data set during timed cooking During operation, it is possible to modify timed cooking duration: 1. When the symbol is lit steadily and the appliance is in the cooking stage, press the control knob. Turn the control knob right or left to alter the preset cooking time. 2. Press the control knob before the symbol stops flashing to set the end of cooking time. Turn the knob right or left to set the end of cooking time. 17 EN Programmed cooking Use 4. Modifying the data set during programmed cooking After modifying the cooking time, the end of cooking time must be reset. During operation, it is possible to modify programmed cooking duration: 1. When the and symbols are lit steadily and the appliance is waiting for cooking to start, press the temperature knob twice. Select the weight of the food to cook by turning the control knob. Use The predefined cooking parameters can be changed at any time, even after cooking has started. A message will indicate when to place the food in the oven and enable the start of cooking. It is not recommended to place the dish in the oven during the automatic pre-heat stage. When the program has finished, the appliance will warn the user with symbol. Select the function to associate with the program using the control knob. 2. Press the control knob to perform cooking with the same parameters currently set (press the knob twice if the buzzer is active). The appliance will automatically restart cooking if it is at the correct temperature; otherwise it will also resume preheating. Cooking in sequence is useful to cook multiple dishes of the same type. For example, it can be used to cook several pizzas in a row. 22 3. Pressing the control knob again will return to point 2 of the change sequence. The appliance will ask to confirm the changes which have just been made. 5. [. . . ] • Check whether an omnipolar switch upstream of the appliance supply line is in the “ON” position. The appliance does not heat up: • Check whether it has been set in “showroom” mode (for further details see “Settings”). The controls do not respond: • Check whether it has been set to “control lock” mode (for further details see “Settings”). The cooking times are longer than those indicated in the table: • Check whether it has been set to “ecologic” mode (for further details see “Settings”). [. . . ]