User manual SMEG SFPA6395X

[. . . ] Contents 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 General safety instructions Manufacturer liability Appliance purpose Disposal Identification plate This user manual How to read the user manual General Description Control panel Other parts Available accessories Instructions First use Using the accessories Using the oven Cooking advice Special functions Preset programs Personal recipes Settings 4 5 5 5 6 6 6 2 Description 7 7 7 8 9 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 3. 8 3. 9 10 10 10 11 11 16 21 29 35 40 4 Cleaning and maintenance 4. 1 Instructions 4. 2 Cleaning the surfaces 4. 3 Ordinary daily cleaning 4. 4 Food stains or residues 4. 5 Removing the door 4. 6 Cleaning the door glazing 4. 7 Removing the internal glass panels 4. 8 Cleaning the inside of the oven 4. 9 Vapour clean (on some models only) 4. 10 Pyrolytic (on some models only) 4. 11 Extraordinary maintenance 45 45 45 45 45 45 46 46 47 48 51 53 5 Installation 5. 1 Electrical connection 5. 2 Cable replacement 5. 3 Positioning 55 55 55 56 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www. smeg. com 3 EN IT 1 Instructions 4 Instructions 1 Instructions 1. 1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Keep children under eight years of age at a safe distance if they are not constantly supervised. • Never rest metallic objects such as knives, forks, spoons and lids on the appliance during use. [. . . ] When finished, press and hold the control knob for at least 5 seconds to return to the main menu. 28 Use This mode allows you to select a pre-set food cooking program. The appliance will automatically calculate the optimum cooking parameters based on the weight entered. 3. Select the type of cooking (where possible, depending on the dish chosen) and press the control knob to confirm. Turn the control knob to the right or left to select the required type of dish from the “preset programs” menu. Turn the control knob to select the dish weight. 29 EN IT 3. 7 Preset programs 2. Select the sub-category of dish to cook and press the control knob to confirm. Use 5. At this point it is possible to start the selected preset program, permanently modify the settings or perform delayed cooking. A message will indicate when to place the food in the oven and enable the start of cooking. 8. If you choose the Start option, cooking will start with the preset program's predefined settings and the display will show all the parameters set. The time shown does not include the automatic reheat time. Some predefined cooking parameters can be changed at any time, even after cooking has started. 30 Use 1. When the preset program has finished, the appliance will warn the user with buzzers and the flashing symbol. Inside the selected preset program, turn the control knob to the left or right to select change from the menu of the selected dish. Press the control knob to perform cooking with the same parameters currently set (press the knob twice if the buzzer is active). The appliance will automatically restart cooking if it is at the correct temperature; otherwise it will also resume preheating. Cooking in sequence is useful to cook multiple dishes of the same type. It is not recommended to place the dish in the oven during the automatic pre-heat stage. Turn the control knob to the right or left to select the function to associate with the preset program. Turn the control knob to the right or left to select the weight to associate with the preset program. Press the control knob to confirm. 31 EN IT Ending a preset program Changing a preset program permanently Use 4. Turn the control knob to the right or left to select the duration to associate with the preset program. Pressing the control knob again will return to point 2 of the change sequence. The appliance will ask to confirm the changes which have just been made. 5. [. . . ] After the automatic cleaning cycle (pyrolytic) it is not possible to select a function: • Verify whether the door lock has deactivated. If it has not, the oven has a safety device that does not allow functions to be selected while the door lock is active. This is because the temperature inside the oven is still too high to permit any type of cooking. The display shows “Error 4”: • The door lock has not properly attached to the door. [. . . ]