User manual SMEG ZCS3

[. . . ] -EN-ZCS3 - ZCS3 - INSTRUCTIONS FOR ASSSEMBLY AND USE Read the safety warnings and instructions for the thermodisinfectors in which the rack is used withcare, together with the safety instructions of the producer of the glassware and any other item placed on the rack. [. . . ] The system has been designed to ensure that no fluid remains inside or on the clogs, to provide the very best hygiene standards. With this rack only, a set of special filters are supplied, to be fitted before use of the rack. The filter set consists of a circular filter with a filter cone, a micro-filter and a coarse filter. To ensure that the appliance operates effectively, it is extremely important to keep the filters clean. after each cycle when washing glassware with labels) to remove any residues which may impair operation. 1939034310019390343100_ZCS3_EN. do cx-EN 1 Ed. 01 - 03/01/2012 -EN-ZCS3 - Coarse filter To remove the coarse filter, press the tabs and lift out (fig. Clean the filter and replace Micro-filter Fitted underneath the coarse filter (fig. [. . . ] +39 0522 8211 - Fax + 0522 821 592 E-Mail: instruments@smeg. it – www. smeg-instruments. com 1939034310019390343100_ZCS3_EN. do cx-EN 3 Ed. [. . . ]