User manual SONY CDX-GT315C

[. . . ] ­ BTM (Best Tuning Memory): The unit selects strong signal stations and stores them. ⷠRDS services ­ You can use FM station with Radio Data System (RDS). ⷠSound adjustment ­ EQ3 stage2: You can choose any one of 7 preset equalizer curves. ⷠOptional unit operation You can also control optional CD/MD changers. [. . . ] This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1 During FM reception, press a number button ((1) to (6)) on which a local station is stored. The CT function may not work even though an RDS station is being received. ⷠThere might be a difference between the time set by the CT function and the actual time. The unit starts to search for a station broadcasting the selected program type. Note You cannot use this function in countries/regions where no PTY data is available. Other functions Changing the sound settings With the card remote commander In step 3, to adjust the selected item, press <, M, , or m. With the card remote commander In step 3, to select the setting, press < or , . After 3 seconds, the setting is complete and the display returns to normal play/reception mode. The following items can be set (follow the page reference for details): "z" indicates the default settings. OFF (Auto Off) To shut off automatically after a desired time when the unit is turned off, ­ "A. With the card remote commander In step 2, to adjust the selected item, press <, M, , or m. "CUSTOM" of EQ3 allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. LOCAL (Local Seek Mode) ­ "LOCAL-ON" : to only tune into stations with stronger signals. By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Be sure to adjust the volume for each connected audio device before playback. 5 Press the select button repeatedly until "AUX" appears, and rotate the volume control dial to adjust the input level (­8 dB to +18 dB). Unit number Disc number The corresponding buttons on the rotary commander control the same functions as those on this unit. Repeat and shuffle play The following controls on the rotary commander require a different operation from the unit. [. . . ] The leads are not matched correctly with the car's accessory power connector. Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's antenna (aerial) booster (only when your car has built-in FM/MW/LW antenna (aerial) in the rear/side glass). The station does not broadcast any traffic announcements despite being TP. The unit starts searching for another frequency with the same PI (Program Identification) data ("PI SEEK" appears). [. . . ]