User manual SONY CFD-S05

[. . . ] ______________ This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Other specifications CD player section System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44. 6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. ) Number of channels 2 Frequency response 20 Hz - 20, 000 Hz +1/­2 dB Wow and flutter Below measurable limit Discs that this unit CANNOT play CD-R/CD-RW other than those recorded in music CD format CD-R/CD-RW of poor recording quality, CD-R/CD-RW that has scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Before playing, clean the CD with a cleaning cloth. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error. Notes on discs NOTE CFD-S05 ©2010 Sony Corporation Printed in China Operating Instructions WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Music discs encoded with copyright protection technologies You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Speaker Full range: 8 cm (3 1/4 inches) dia. , 4 , cone type (2) Outputs Headphones jack (stereo minijack): For 16 - 32 impedance headphones Input AUDIO IN jack (stereo minijack) Power output 1. 7 W + 1. 7 W (at 4 , 10% harmonic distortion) Power requirements For CD radio cassette-corder: 120 V AC, 60 Hz 9 V DC, 6 R14 (size C) batteries Power consumption AC 13 W Battery life For CD radio cassette-corder: On power sources On placement FM recording Sony R14P: approx. 13 h Please register this product on line at http://www. sony. com/productregistration Proper registration will enable us to send you periodic mailings about new product, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. 365 mm × 134 mm × 230 mm (w/h/d) (14 3/8 inches × 5 3/8 inches × 9 1/8 inches) (incl. batteries) Supplied accessory AC power cord (1) Design and specifications are subject to change without notice. On operation Power sources Optional accessory Notes on cassettes Sony MDR headphones series Side A Tab for side B Tab for side A The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. Cleaning the cabinet 2 to a wall outlet 1 to AC IN If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Connect the AC power cord or insert six R14 (size C) batteries (not supplied) into the battery compartment . Notes Replace the batteries when the OPR/BATT indicator dims or when the unit stops operating. Before you replace the batteries, be sure to take out the CD from the unit. To use the unit on batteries, disconnect the AC power cord from the unit. Basic Operations Playing a tape 1 Press POWER . 3 Press , and insert the tape into the tape Other Operations Using the display To check the total track number and playing time of the CD Press once if the CD is stopped and twice if the CD is playing. After the total track number is displayed, the total playing time is displayed. To check the total track number again, press DISPLAY/ENTER . Troubleshooting Playing preset radio stations 1 Press POWER . 3 Press PRESET + or ­ to tune in the stored station. General The power is not on. Connect the AC power cord to the wall outlet securely. 4 Press AUDIO IN and start playback on the Place the CD with the label surface up. Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. There is a problem with the quality of the CD-R/CD-RW, recording device or application software. The sound may drop out or noise may be heard when using a poor quality CD-R/CD-RW or if there is a problem with the recording device or application software. The sound drops out. Pause playback Stop playback Fast-forward or rewind* Eject the cassette To adjust the volume Press VOLUME +, ­ . connected component. The sound from the connected component is output from the speakers of this unit. To connect the unit to a TV or VCR, use an extension cable (not supplied) with a stereo-mini jack on one end and two phono plugs on the other end. To listen through headphones Connect the headphones to the (headphones) jack on the back of the unit. Repeat all tracks Shuffle play Repeat tracks in random order Program play " " Radio Reception is poor. To reinforce the bass sound Press MEGA BASS . To return to normal sound, press the button again. * When the tape is wound to the end, press to release or . "SHUF" "SHUF" and "" "PGM" Press . [. . . ] When you open the CD compartment or turn off the unit, the resume play is also canceled. Listening to the radio 1 Press POWER . 2 Press RADIO BAND repeatedly. Each time you press the button, the radio band toggles between AM and FM. 1 Press POWER . 3 Hold down AUTO PRESET for 2 seconds until "Auto" flashes in the display. 4 Press DISPLAY/ENTER . The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically 3 Hold down TUNE + or ­ until the frequency You need to preset a station with a weak signal manually. digits begin to change in the display. The unit automatically scans the radio frequencies and stops when it finds a clear station. [. . . ]