User manual SONY CMT-DX400

[. . . ] Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Except for European model As an ENERGY STAR® partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. 21 Starting recording with 6 seconds of prestored audio data -- Time Machine Recording . How to use this page Use this page to find the location of buttons and other parts of the system that are mentioned in the text. [. . . ] You can specify a portion within a track and erase the portion with ease. You can shift the desired portion by frame*, minute or second intervals. This function is convenient to erase the unneccessary parts recorded from satellite broadcast or radio programs. If you perform the above operation when the Group Function is on, not only the tracks within the group, but all the tracks on the MD are erased. " appear alternately while the deck repeats a few seconds of a portion before point A. You can use this function to change the order of any track on the disc. Or > on the remote repeatedly to find the starting point of the portion to be erased (point A) while monitoring the sound, then press ENTER/YES on the remote. " appear alternately and the deck repeats a portion of the few seconds before point A and after point B successively. Or > on the remote repeatedly to find the ending point of the portion to be erased (point B) while monitoring the sound, then press ENTER/YES on the remote. Repeatedly until the desired track number to move appears, then press ENTER/YES on the remote. To shift the point by minute or second intervals in steps 6 and 8, press m or M on the remote repeatedly to flash minute, second, or frame indication, then press . An amount of time that is roughly equal to or longer than the playback time of the track is required when recording over the track. Repeatedly until the track number you want to change the recording level appears, then press ENTER/YES on the remote. You cannot change the recording level of the tracks recorded in MDLP mode. Repeatedly changing the recording level results in poor sound quality. The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level. Repeatedly until the track number you want to change the recording level appears, then press ENTER/YES on the remote. The system plays the portion that will be recorded over using Fade-in or Fade-out Recording. You can then tune in any of those stations simply by selecting the corresponding preset number. Automatically tune in all of the stations that can be received in your area and then store them manually Scanning stops automatically when a station is tuned in. at that time , "TUNED" and "STEREO" (for stereo program only) appear. If "TUNED" does not appear and the scanning does not stop You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. [. . . ] Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition or the drive's characteristics. Besides, the discs, which are not yet finalized at the end of recording, cannot be played back. Demagnetise the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetising cassette. Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. [. . . ]