User manual SONY ECM-AW3

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY ECM-AW3. We hope that this SONY ECM-AW3 user guide will be useful to you.


SONY ECM-AW3 : Download the complete user guide (573 Ko)

You may also download the following manuals related to this product:

   SONY ECM-AW3 (655 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (1580 ko)
   SONY ECM-AW3 (1170 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (655 ko)
   SONY ECM-AW3 (381 ko)
   SONY ECM-AW3 (655 ko)
   SONY ECM-AW3 (655 ko)
   SONY ECM-AW3 annexe 1 (381 ko)
   SONY ECM-AW3 annexe 2 (381 ko)
   SONY ECM-AW3 annexe 1 (570 ko)
   SONY ECM-AW3 annexe 3 (381 ko)
   SONY ECM-AW3 annexe 2 (570 ko)

Manual abstract: user guide SONY ECM-AW3

Detailed instructions for use are in the User's Guide.

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ?Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC Rules, the Canadian ICES-003 and RSS-Gen of IC Rules. [. . . ] If the earphone is placed near the microphone (sound pickup unit) during recording, a howling effect (acoustic feedback) may occur. If this happens, place the earphone farther away from the microphone (sound pickup unit), or lower the volume of the earphone. When used at low temperature, the battery performance drops compared to use at normal temperature (25 C (77 F)) and operating time becomes shorter. Do not expose the batteries to excessive heat such as sunshine, fire or the like. The Bluetooth trademarks are owned by their proprietor and used by Sony Corporation under license. All other products names mentioned herein may be trademarks or registered trademarks of their respective companies. Identifying the Parts Microphone (?-?)* Receiver (?-?)* Microphone/Receiver * [MICROPHONE] and [RECEIVER] are printed on the microphone and receiver, respectively, as illustrated. Power switch ? To prevent battery drain, turn off the Power switch when not in use. Communication lamp ? The lamp lights, blinks or goes out according to the status of the devices and communication as follows. Status Immediately after turning on the microphone and receiver Connection established and sound can be recorded clearly Turning off the receiver Receiver Blinks blue slowly (standby mode) Lights up blue Goes out Blinks blue slowly (standby mode) Goes out Microphone ??????? ? 1. ????? Turning off the Blinks blue slowly microphone (standby mode) Interrupted audio due to Blinks blue quickly bad communication status Earphone jack ? When an earphone is connected to the earphone jack of the receiver, sound picked up by the microphone can be monitored. When an earphone is connected to the earphone jack of the microphone, sound picked up by the receiver can be monitored. When the supplied recording cable is connected between the earphone jack of the receiver and a microphone jack of the recording device, sound picked by the microphone can be recorded on the recording device. ) ? ? ? Attaching the receiver to the grip belt of the video camera (see illustration ?-?) When using the receiver with the video camera, attach it with the clip where it is visible and nothing blocks it from the microphone, such as to the grip belt of the video camera, as illustrated. Using the Wireless Microphone Using the wireless microphone as a microphone Before connecting the receiver to the recording device, make sure that the power switches of the receiver and recording device are set to OFF. utilisation du brassard (voir l?illustration ?-?) Conditions d?utilisation Fixez le microphone avec le clip au brassard et portez le brassard au bras. 1 Connect the supplied recording cable to the earphone jack of the receiver and the microphone input jack of the recording device. With a stereo recording device, the same sound is recorded in the right and left channels. Immediately after they are turned on, the communication lamps of the two devices start slowly blinking blue, indicating that they are trying to detect, connect to, and authenticate each other. When connection is established and the recording device is ready for clear sound recording, the communication lamp of each device lights up blue. [. . . ] Mise en place d?une pile Attach the microphone to a breast pocket, etc. Attach the microphone in a position that is suitable for the recording location. To define the suitable position, connect an earphone to the receiver and monitor the sound picked up by the microphone. You can also monitor sound by connecting the receiver to the recording device with the recording cable and an earphone to the recording device. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ECM-AW3




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ECM-AW3 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.