User manual SONY ICD-MX20DR9

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY ICD-MX20DR9. We hope that this SONY ICD-MX20DR9 user guide will be useful to you.


SONY ICD-MX20DR9 : Download the complete user guide (760 Ko)

You may also download the following manuals related to this product:

   SONY ICD-MX20DR9 DATASHEET (553 ko)

Manual abstract: user guide SONY ICD-MX20DR9

Detailed instructions for use are in the User's Guide.

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Notes · You cannot set A-B Repeat for a section that overlaps two or more messages. · If you do not set the finishing point (B), the finishing point is automatically set at the end (or the beginning) of the message. 18GB Erasing Messages You can erase the recorded messages one by one or all messages in a folder at a time. Note that once a recording has been erased, you cannot retrieve it. Erasing messages one by one When a message is erased, the remaining messages will advance and renumbered so that there will be no space between messages. Basic Operations Before erasing Message 1 Message 2 Message 3 Message 4 Message 5 Erase Message 3 After erasing Message 1 Message 2 Message 3 Message 4 Remaining messages are renumbered. 1 Press ERASE while playing back the message you want to erase or press ERASE for more than 1 second during stop mode. A beep will sound and the message number and "ERASE" will flash while the first and last 5 seconds of the message are played back 10 times. (For example, if you erase Message 3, Message 4 will be renumbered as Message 3. When erasing is completed, the unit will stop at the beginning of the following message. ) To cancel erasing Press xSTOP before step 2. Continued 19GB Erasing Messages (continued) To erase other messages Repeat steps 1 and 2. To erase a message partially First divide the message by adding an index (see page 23) and then follow the steps on page 19 to erase the message. Erasing all messages in a folder e. g. Folder A Message 1 Message 2 Message 3 Folder B Blank space Message 1 Message 2 Message 3 Blank space Message 1 Message 2 Message 3 1 Press FOLDER to select the folder you want to erase. 2 While pressing xSTOP, press ERASE for more than 1 second. "ALL ERASE" will flash for 10 seconds. 3 While the display is flashing, press ERASE. To cancel erasing Press xSTOP before step 3. 20GB BEditing Messages Adding a Recording Adding a Recording to a Previously Recorded Message You can add a recording to the message being played back. The added recording will be placed after the current message and counted as a part of the message. OPR indicator Built-in microphone zREC/STOP Editing Messages xSTOP During playback of Message 3 After adding a recording Message 3 Message 4 Message 3 Meeting at 2 o'clock on December 1. at Conference room A Message 4 Added recording 1 During playback, press zREC/STOP for more than 1 second. The REC indicator appears and "ADD" flashes three times on the display window. When you move a message to another folder, the one in the previous folder will be deleted. 26GB BOther Functions Starting Recording at a Desired Time -- Timer Recording You can start recording at a desired time. . /> NxPLAY/STOP MENU 1 Display the timer setting display. 1 Press MENU. The unit enters the menu mode and "ALARM" will be displayed. or > repeatedly to display "TIMER" and press NxPLAY/STOP. "OFF" starts to flash. Other Functions Note The timer cannot be set if the clock has not been set . "START" is displayed for one second, and then "DATE" will flash in the display window. Continued 27GB Starting Recording at a Desired Time -- Timer Recording (continued) 2 Set the recording start date. · to start recording on a desired date 1 Press NxPLAY/STOP while "DATE" is flashing. 3 Select the month and day digits in the same way. · to record once a week Press . or > to select the day of the week. · to record at the same time every day Press . or > to select "DAILY" and press NxPLAY/STOP. 3 Set the recording start time. 1 Press . or > to select the minute digits and press NxPLAY/STOP. "END" is displayed for one second, and then the hour digits of the recording end will flash in the display window. 4 5 6 Repeat Step 3 to set the recording end time. or > to select "SP" or "LP" and press NxPLAY/STOP. Press MENU to exit the menu mode. The display will return to normal display and " " is displayed. At the set time, recording starts automatically. When the recording ends, the unit will stop automatically at the beginning of the newly recorded message. 28GB To stop the timer recording Press xSTOP. To change the timer setting Press . [. . . ] Recording is ·The advanced VOR function (page 13) is interrupted. Recording level is ·This unit is designed to automatically adjust unstable (when the recording level when recording meetings, recording music, etc. ) etc. , and is not suitable for music recording. Playback speed is too ·Set the PLAY SPEED selector to "NORMAL. " fast or too slow. "--Y--M--D" or " --:--"·The date of recording will not be displayed if is displayed on the you recorded the message when the clock was REC DATE display. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ICD-MX20DR9




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ICD-MX20DR9 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.