User manual SONY ICF-DS11IP

[. . . ] 4-150-697-41(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. [. . . ] The display returns to the clock. 2 Press and hold the desired STATION Universal Dock Adapter SELECT PRESET 1 to 5 buttons until the preset number display changes from flashing to fully lit. Example: To preset FM 89. 8 MHz onto the preset 1 button. Setting the clock manually 1 Plug in the unit. the year. 3 Press TIME SET + or ­ repeatedly to set 4 Press CLOCK. 5 Repeat steps 3 and 4 to set the month, FM wire aerial The seconds start incrementing from zero. Notes If you do not press any button for about 1 minute while setting the clock, the clock setting will be canceled. Note The volume cannot be set for the buzzer alarm. display, press ALARM SET A or B again. The display returns to clock mode for about 4 seconds after you have finished the duration setting and released SLEEP, and then the sleep timer starts. The unit plays for the duration you set, and then stops. To confirm an alarm time setting Setting the alarm Press TIME SET + or ­. The setting will be displayed for about 4 seconds. To turn off the unit before the preset time Press SNOOZE/DATE/SLEEP OFF (SNOOZE on the remote) or OFF/ALARM RESET (OFF on the remote). 1 Attach the adapter for your iPod/iPhone. 2 Insert your iPod/iPhone into the connector of the unit. This unit is equipped with 3 alarm modes--iPod, radio and buzzer. Before setting the alarm, make sure to set the clock (see "Setting the clock for the first time"). To change an alarm setting To set the alarm 1 Press and hold ALARM SET A or B. "WAKE UP" appears and the hour flashes in the display. AC power cord 2 Press TIME SET + or ­ repeatedly until the desired hour appears. Press and hold TIME SET + for at least 2 seconds to move the alarm time forwards. Press and hold TIME SET ­ for at least 2 seconds to move the alarm time back. When you release the button, the changed time will flash for about 2 seconds. To change the alarm time again, press TIME SET + or ­ within these 2 seconds, otherwise the setting change will be fixed as displayed. To change the sleep timer setting You can press SLEEP repeatedly to select the desired sleep timer setting even after the sleep timer has been activated. To deactivate the sleep timer Press SLEEP repeatedly to set the sleep timer to "OFF" in step 2. To doze for a few more minutes To display the year and date The STATION SELECT tactile dot. PRESET 3, VOLUME + and iPod & iPhone buttons have a Press SNOOZE/DATE/SLEEP OFF (SNOOZE on the remote) once for the date, and press it again for the year. After a few seconds, the display will change back to the current time automatically. Tuning in to a preset station 1 Follow steps 1 to 2 in "Manual tuning" and select the AM or FM band. 2 Press one of the STATION SELECT PRESET buttons where the desired station is stored. 3 Press ALARM SET A or B. The minute flashes. To cycle the hour rapidly, press and hold TIME SET + or ­. 4 Repeat step 2 to set the minute. You can operate the connected iPod by this unit or the iPod buttons. Setting the brightness of the display Three levels of brightness are available by pressing BRIGHTNESS. 3 Adjust the volume using VOLUME + or ­ (VOL + or ­ on the remote). The preset station can also be selected by PRESET + or ­ on the remote. 6 Repeat step 2 to set the days of the week. You can select the days from the following three options: Every day: MON TUE WED THU FRI SAT SUN Week day: MON TUE WED THU FRI Week end: SAT SUN The alarm mode setting is entered. The days of the week flash. Press SNOOZE/DATE/SLEEP OFF (SNOOZE on the remote). The sound turns off but will automatically come on again after about 10 minutes. You can change the snooze time by pressing SNOOZE/DATE/SLEEP OFF (SNOOZE on the remote) repeatedly within 4 seconds. To stop the snooze timer, press OFF/ALARM RESET (OFF on the remote). Other useful functions To get the MEGA Xpand effect Press MEGA Xpand. To return to normal sound, press the button again. To reinforce the bass sound ­Auto preset tuning 1 Follow steps 1 to 2 in "Manual tuning" 2 Press and hold RADIO BAND until "AP" and select the AM or FM band. Press DISPLAY/MEMORY. 4 Adjust the volume using VOLUME + or ­ (VOL + or ­ on the remote). To Turn off the iPod Pause playback Press OFF, or press and hold iPod & iPhone iPod & iPhone To resume play, press it again. (forward) (backward)* (forward) or (backward) while playing and hold it until you find the point. [. . . ] Customers living in a country/region that does not use Daylight Saving Time (summer time) must cancel Automatic DST/Summer Time adjustment before using the unit. and select the AM or FM band. Press and hold TUNING + or ­ (TUNE + or ­ on the remote). 3 Adjust the volume using VOLUME + or ­ (VOL + or ­ on the remote). + : scans upward through the frequency bands. When a station is received, scanning stops. Keep digital music players or mobile phones away from the AM loop aerial or the FM aerial, as this may lead to reception interference. When you are listening to the radio with an iPhone connected to the unit, interference with radio reception may occur. [. . . ]