User manual SONY KDL-32BX300

[. . . ] If you should lose the fuse cover, please contact your nearest Sony service station. Notes on Digital TV function · Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG-2 and H. 264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG2 and H. 264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. · Your cable provider may charge a fee for their services, or require you to agree to its terms and conditions of business. · This TV set complies with DVB-T and DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed. [. . . ] To use this feature, a renderercompatible device such as a digital still camera or mobile phone is required as the controller. Refer as well to the instruction manual supplied with the controller. 3 Press F/f to select a server, then press . The file or folder list appears. To display the thumbnail list, press the yellow button while the list is displayed. When the server cannot be found See "Checking the Network Connection" (page 27) and "Adjusting the Server Display Settings" (page 27). 4 Press F/f to select a file or folder, then press . Playback starts. z · A map can be displayed with a photograph in the case of longitude and latitude information has been recorded to photograph's Exif data (page 22). 1 Set "Renderer Function", "Renderer Access Control" and "Renderer Set-up" in "Network Settings" if necessary (page 40). 2 Play the file selected using the controller on the TV. Use the controller or the TV's remote to perform operations during playback. ~ · Depending on the network device, it may be necessary to register the TV with the network device. · Picture quality may appear coarse when using Photo because images may be enlarged depending on the file. Also, images may not fill the entire screen depending on the image size and aspect ratio. · Some photo files may take some time to be displayed when using Photo. · To play files that are received from a network device, they need to conform to one of the following file formats. ­ Still images: JPEG format ­ Music: MP3 format or linear PCM format ­ Video: The following file formats stored on the server: AVCHD, HDV, MPEG2-PS (which in some cases may not be able to be played) Depending on the network device, the file format may be converted before transfer. In such cases, the file format resulting after conversion is used for playback. You can select a digital channel, Digital Favourite list (page 17) and the Digital Electronic Programme Guide (EPG) (page 16). You can select an analogue channel or Analogue Favourite list (page 17). To hide the list of analogue channels, set "Programme List Display" to "Off" (page 36). To assign a label to an external input, see "AV Preset" (page 35). You can enjoy "AppliCast" (page 25). External Inputs Network 3 Press F/f to select the item, then press . 5 Press HOME to exit. ~ · The options you can adjust vary depending on the situation. · Unavailable options are greyed out or not displayed. 28 GB TV Settings Menu System Update You can update the TV system using USB memory. http://support. sony-europe. com/TV/ Clock/Timers Sleep Timer Sets the TV to automatically switch to standby mode after a certain amount of time. When "Sleep Timer" is activated, the (Timer) indicator on the TV front panel lights up in orange. z · When you turn off the TV and turn it on again, "Sleep Timer" is reset to "Off". Switches to digital mode and obtains the time. On Timer Auto Clock Update Eco Using Menu Functions Reset Power Saving Resets all the "Eco" settings to the factory settings. [. . . ] The TV cannot be found from Check Connections renderer-compatible device · Check that the LAN cable and/or mains lead of the server has not (the controller). become disconnected. Check Settings · Check if the "Renderer Function" is activated (page 40). · Check that the connected device is registered under "Renderer Access Control" (page 40). Only a few icons appear under · This is normal when internet connection is not available. [. . . ]