User manual SONY KDL-32EX600

[. . . ] 4-188-040-11(1) LCD Digital Color TV Operating Instructions Introducing Your New BRAVIA® Getting Started Operating the TV Using Features Using the Menus Other Information Sony Customer Support U. S. A. : www. sony. com/tvsupport Canada: www. sony. ca/support United States 1. 800. 222. SONY Canada 1. 877. 899. SONY Please Do Not Return the Product to the Store KDL-46EX600 / 40EX600 / 32EX600 Owner's Record The model and serial numbers are located at the side and rear of the TV. Refer to them whenever you call upon your Sony dealer regarding this TV. Model Name Serial No. Your BRAVIA TV is ENERGY STAR® qualified in the "Home" mode. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. Changes to certain features, settings, and functionalities of this TV (i. e. [. . . ] Screen Mode to use Normal Select to display the 4:3 picture in its original size. for 4:3 sources Full Select to enlarge the 4:3 picture horizontally only, to fill the display area. Zoom Select to enlarge the picture horizontally and vertically to an equal aspect ratio that fills the wide screen. Off Select to continue using the current Wide Mode setting when the channel or input is changed. Displays pictures in their original size when parts of the picture are cut off. -1 Enlarges the picture so that the edges are outside the visible display area. Horizontal Allows you to move the position of the picture left and right. (Available in Wide Zoom Center and Zoom. ) Vertical Center Allows you to move the position of the picture up and down. (Available in Wide Zoom and Zoom. ) Wide Mode Using the Menus · Normal is not available when you are watching a 720p, 1080i or 1080p source. · If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off. · 4:3 Default is not available if Auto Wide is set to Off. (Continued) 35 Option Description PC Settings When a PC is connected to the TV and the PC input is selected, the PC settings screen appears instead of the Screen settings. You can also select the PIP feature which allows you to view two pictures simultaneously from TOOLS button (see page 26). Full 1 Select to enlarge the picture to fill the display area, keeping its original aspect ratio. Auto Select to automatically adjust the display position and phase of the Adjustment picture when the TV receives an input signal from the connected PC. Note that Auto Adjustment may not work well with certain input signals. Horizontal Allows you to move the position of the picture left and right. Center Vertical Allows you to move the position of the picture up and down. Center · For the PC Input Signal Reference Chart, see page 46. · Auto Adjustment, Phase and Pitch are not available with PC signal connected to HDMI input. 36 Using the Channel Settings Option Description Favorites Signal Type Auto Program Select favorite channels and external inputs (see page 27). Cable Antenna Select if you are receiving cable channels via Cable TV provider. [. . . ] · Programs in 4:3 aspect ratio will have bands on left and right sides of the screen. · Programs broadcast in HD formats (720p and 1080i) with 4:3 content will commonly have black bands on the left and right sides of the screen which are added by the broadcaster (see image on left). · Auto Wide will not expand the picture when the black bands on the sides of the screen are added by the broadcaster. You can manually change the Wide Mode to Wide Zoom, or Zoom to fill the screen, which will remain in affect until you change the channel or input or manually change the Wide Mode again. [. . . ]