User manual SONY MEX-BT2700

[. . . ] Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. [. . . ] For details on cellular phone operation, refer to your cellular phone manual. Note Depending on the cellular phone, handsfree connection may be cut off when call transfer is attempted. You can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call. The volume level is adjustable for any difference between the unit and the Bluetooth audio device. 3 Press the select button repeatedly until "BTA" appears, and rotate the volume control dial to adjust the input level (­8 dB to +18 dB). You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. Other functions Changing the sound settings After 5 seconds, the setting is complete and the display returns to normal play/reception mode. Operations other than the above should be performed on the audio device. notes · During audio device playback, information such as track number/time, playback status, etc. Even if the source is changed on this unit, playback of the audio device does not stop. Tip You can connect a cellular phone that supports A2DP (Advanced Audio Distribution Profile) as an audio device and listen to music. The following items can be set (follow the page reference for details): EQ3 Selects an equalizer curve from 7 music types. LOW*1, MID*1, HI*1 (page 20) BAL (Balance) Adjusts the sound balance between the left and right speakers. FAD (Fader) Adjusts the relative level between the front and rear speakers. ) AUX*3 (AUX level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. BTA*4 (BT-Audio level) Adjusts the volume level for each connected Bluetooth audio device. This setting negates the need to adjust the volume level between sources (page 18). If " " lights, press and hold (BT) until " " turns off. "CUSTOM" of EQ3 allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. After 5 seconds, the setting is complete and the display returns to normal play/reception mode. [. . . ] the disc is incompatible with the MP3/WMA format and version (page 23). T Install the unit at an angle of less than 45° in a sturdy part of the car. The station does not broadcast any traffic announcements despite being TP. While connected to a Bluetooth device, this unit cannot be detected from another device. [. . . ]