User manual SONY MEX-N4100BT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY MEX-N4100BT. We hope that this SONY MEX-N4100BT user guide will be useful to you.


SONY MEX-N4100BT : Download the complete user guide (11269 Ko)

Manual abstract: user guide SONY MEX-N4100BT

Detailed instructions for use are in the User's Guide.

[. . . ] 4-548-379-22(1) Bluetooth® Audio System Operating Instructions Bedienungsanleitung Mode d’emploi Istruzioni per l’uso Gebruiksaanwijzing GB DE FR IT NL For the connection/installation, see page 28. MEX-N5100BT/MEX-N4100BT For safety, be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use. Made in Thailand Laser Diode Properties  Emission Duration: Continuous  Laser Output: Less than 53. 3 μW (This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. [. . . ] Basic Setting Operation You can set items in the following setup categories: General setup (GENERAL), Sound setup (SOUND), Display setup (DISPLAY), BLUETOOTH setup (BT), SongPal setup (SONGPAL) (Not available when the BT phone is selected. The items that can be set differ depending on the source and settings. To return to the previous display Press General Setup (GENERAL) CLOCK-ADJ (clock adjust) (page 7) CAUT ALM (caution alarm) Activates the caution alarm: [ON], [OFF] (page 6). ) The volume level is adjustable in 1 dB steps, from -6 dB to +6 dB. POSITION (listening position) F/R POS (front/rear position) Simulates a natural sound field by delaying the sound output from speakers to suit your position:  [FRONT L] (front left),  [FRONT R] (front right),  [FRONT] (center front),  [ALL] (center of your car), [OFF] (no position set) ADJ POSITION* (adjust position) Fine-tunes the listening position setting: [+3] – [CENTER] – [-3]. DSEE (digital sound enhancement engine) Improves digitally compressed sound by restoring high frequencies lost in the compression process. AAV (advanced auto volume) Adjust the playback volume level of all playback sources to the optimum level: [ON], [OFF]. RB ENH (rear bass enhancer) Rear Bass Enhancer enhances the bass sound by applying a low pass filter setting to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. Sound Setup (SOUND) This setup menu is available when any source except for the BT phone is selected. MEGABASS (mega bass) Reinforces bass sound in synchronization with the volume level: [ON], [OFF]. AUDIO+ (ClearAudio+) Reproduces sound by optimizing the digital signal with the Sony recommended sound settings: [ON], [OFF]. (Automatically sets to [OFF] when [EQ10 PRESET] is changed and/or [MEGABASS] is set to [ON]. ) EQ10 PRESET Selects an equalizer curve from 10 equalizer curves or off: [OFF] , [R AND B] , [ROCK] , [POP] , [DANCE] , [HIP-HOP] , [ELECTRONICA] , [JAZZ] , [SOUL] , [COUNTRY] , [CUSTOM]. SW DIREC (subwoofer direct connection) You can use the subwoofer without a power amplifier when it is connected to the rear speaker lead. ) Be sure to connect a 4 – 8 ohm subwoofer to either of the rear speaker leads. HPF SLOP (high pass filter slope) Selects the HPF slope (effective only when [HPF FREQ] is set to other than [OFF]): [1], [2], [3]. AUX VOL (AUX volume level) Adjusts the volume level for each connected auxiliary device: [+18 dB] – [0 dB] – [-8 dB]. This setting negates the need to adjust the volume level between sources. BTA VOL (BLUETOOTH audio volume level) Adjusts the volume level for each connected BLUETOOTH device: [+6 dB] – [0 dB] – [-6 dB]. This setting negates the need to adjust the volume level between sources. display Setup (DISPLAY) DEMO (demonstration) Activates the demonstration: [ON] , [OFF]. [. . . ] 1 Position the bracket  inside the dashboard, then bend the claws outward for a tight fit. 182 mm (7 1/4 in) 53 mm (2 1/8 in) Using the wired remote control 1 To enable the wired remote control, set [STR CONTROL] in [SET STEERING] to [EXTERNAL] (page 17). Ύ 32GB  Catch  2 Mount the unit onto the bracket , then attach the protection collar . Ύ    Notes  If the catches are straight or bent outwards, the unit will not be installed securely and may spring out. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY MEX-N4100BT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY MEX-N4100BT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.