User manual SONY STR-DN1030

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY STR-DN1030. We hope that this SONY STR-DN1030 user guide will be useful to you.


SONY STR-DN1030 : Download the complete user guide (11235 Ko)

You may also download the following manuals related to this product:

   SONY STR-DN1030 (1059 ko)
   SONY STR-DN1030 (11339 ko)
   SONY STR-DN1030 QUICK START GUIDE (1059 ko)
   SONY STR-DN1030 QUICK START GUIDE (1059 ko)
   SONY STR-DN1030 QUICK START GUIDE (1057 ko)
   SONY STR-DN1030 QUICK START GUIDE (1057 ko)
   SONY STR-DN1030 QUICK START GUIDE (1562 ko)
   SONY STR-DN1030 QUICK START GUIDE (1057 ko)
   SONY STR-DN1030 DATASHEET (196 ko)
   SONY STR-DN1030 GUI MENU LIST (523 ko)
   SONY STR-DN1030 QUICK SETUP GUIDE (2342 ko)
   SONY STR-DN1030 QUICK START GUIDE (1024 ko)

Manual abstract: user guide SONY STR-DN1030

Detailed instructions for use are in the User's Guide.

[. . . ] ⷠUnplug the unit from the wall outlet if it is not to be used for an extended period of time. However, there are certain procedures that may apply to only one of the tuners. Check the model number on the front of your tuner so you`ll know which instructions apply to you. Place the unit in a location with adequate ventilation to prevent heat build-up and prolong the life of its components. [. . . ] When the tuner locates a station, it stops automatically, "TUNED" appears in the display, and the signal meter indicates the strength of the broadcast signal. Turn TUNING/SELECT until "Auto-betical" appears in the display and press ENTER. For RDS stations, the tuner first checks for stations broadcasting the same programme, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Programme Service name, then assigned a two character preset code. Regular FM stations are assigned two-character preset codes and stored after the RDS stations. If you move to another area, repeat this procedure to store stations in your new area. The ANTENNA, ANT ATT, IF BAND, and FM MODE settings are also stored along with the station. ⷠIf you move the aerial after storing stations using "Autobetical select, " the stored settings may no longer be valid. Z If you cannot tune in the station you want (Manual Tuning) With manual tuning you can search through all stations broadcasting on each band, and tune in stations with extremely weak signals that you might not be able to receive with automatic tuning. Turn the knob to the right for a higher frequency; turn it to the left for a lower frequency. When you reach the highest or lowest frequency of any band, tuning stops. You can use the digital signal meter to check the signal strength of FM frequencies. the display range of the digital meter is from 16 to 70 dB (1µV of radio frequency voltage = 0dB). To obtain a signal to noise ratio sufficient for receiving a stereo broadcast, we recommend a reading greater than 50 dB. (You can also change the FM MODE while using the signal meter to determine the best reception. You can assign a name up to 8 characters long (5 characters for the ST-SA3ES) to each preset station except FM RDS stations. When the station is tuned in, the station name will appear along with the frequency. This tuner's sorting feature lets you arrange your station presets automatically, according to alphabetical order, signal strength, country code, or tuner band. When the character you want appears, press CHARACTER to move the cursor into position for the next character. If you make a mistake Press CHARACTER repeatedly until the character you want to change flashes (every time you press CHARACTER, the next character flashes). Turn TUNING/SELECT until "Sort" appears in the display and press ENTER. if no stations have been stored as presets , "No Preset" appears in the display. [. . . ] The unit enters search mode ("Search" and "Traffic" appear alternately in the display). Press ENTER when the tuner receives the station you desire to listen to that programme. Programme Identification Determine each broadcast's country of origin. To monitor news and/or information programmes 1 Tune to a preset FM RDS station so that the RDS TP or RDS TP EON indicators light in the display. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY STR-DN1030




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY STR-DN1030 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.