User manual SONY VAIO VPCB11LGX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPCB11LGX. We hope that this SONY VAIO VPCB11LGX user guide will be useful to you.


SONY VAIO VPCB11LGX : Download the complete user guide (2662 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPCB11LGX QUICK START GUIDE (1171 ko)
   SONY VAIO VPCB11LGX DATASHEET (880 ko)
   SONY VAIO VPCB11LGX QUICK START GUIDE (1171 ko)
   SONY VAIO VPCB11LGX HARD DISK DRIVE REPLACEMENT INSTRUCTIONS (384 ko)
   SONY VAIO VPCB11LGX OPTICAL DISK DRIVE REPLACEMENT INSTRUCTIONS (348 ko)

Manual abstract: user guide SONY VAIO VPCB11LGX

Detailed instructions for use are in the User's Guide.

[. . . ] PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Netscape 7. 0 is a registered trademark of Netscape Communications Corporation. PowerQuest and Drive Image are registered trademarks of PowerQuest Corporation. Norton AntiVirus is a registered trademark of Symantec Corporation. [. . . ] (See Power On Self Test Messages on page 64 for more information) Make sure you select Save Changes And Exit when exiting the BIOS setup utility. BIOS setup changes were not saved when you made them and exited the BIOS setup utility returning it to previous settings. The BIOS CMOS hold-up battery has failed. Contact your support representative for repairs. This is not a user serviceable part but has a normal life of 3 to 5 years. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. Your system display won't turn on when the system is turned on or when the system has resumed. The system may be passwordprotected. 61 S Series. book Page 62 Thursday, February 19, 2004 4:52 PM LifeBook S7000 Notebook Problem Possible Cause Possible Solutions Video Problems The built-in display is blank when you turn on your LifeBook notebook. (See figure 2-3 on page 6 for location) Pressing [F10] while holding down the [Fn] key allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order are: built-in display only, external monitor only, both built-in display and external monitor. Move the display and the brightness control until you have adequate visibility. The angle of the display and the brightness settings are not adequate for your lighting conditions. The power management timeouts may be set for very short intervals and you failed to notice the display come on and go off again. The LifeBook notebook turned on with a series of beeps and your built-in display is blank. (See Specifications on page 77 for more information) See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. 63 S Series. book Page 64 Thursday, February 19, 2004 4:52 PM LifeBook S7000 Notebook POWER ON SELF TEST MESSAGES The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance. nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kilobytes success-fully tested by the Power On Self Test. (This can only appear if you have an SRAM PC Card installed. ) *Diskette drive A error or Diskette drive B error Drive A: or B: is present but fails the BIOS Power On Self Test diskette tests. Check to see that the drive is defined with the proper diskette type in the Setup Utility, (See BIOS Setup Utility on page 29 for more information) and that the diskette drive is installed correctly. If the disk drive is properly defined and installed, avoid using it and contact your support representative. *Extended RAM Failed at offset: nnnn Extended memory not working or not configured properly. If you have an installed memory upgrade module, verify that the module is properly installed. If it is properly installed, you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative. [. . . ] Upon authentication, the access point checks whether the same network key is set to the client. If the client uses a wrong network key or the network key itself is not set, authentication is unsuccessful, allowing no communications with the access point. SSID (Security Set Identifier) See "Network name" Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPCB11LGX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPCB11LGX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.