User manual SONY VPCEG21FX/L

[. . . ] Make sure you have the accessories listed below. Included in this box Remote Control Stand Parts and Cables Attach the TV to the Stand Connect video devices Insert the batteries into the remote control Power on and start the initial setup Smart Touch Control Cable clip Power cord IR extender Step 1 Step 2 Step 3 Step 4 Batteries (AAA x 2) RCA Adapter Component adapter Blanking Bracket Warning: Screens can be damaged from direct pressure when handled incorrectly. [. . . ] Use the packing material to protect the screen. 1 5 Remove the protection film from the bottom of the TV and stand, as shown by the illustration. REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV (such as the box). 2 x2 Base Leg x 12 Screws 6 Holding the stand parallel to the screen, slide the stand into the notches on the back of the TV. Fit the guide protrusion on each edge of the stand in the matching hole on the sole of the TV. Put a base, legs and screws off to assemble the stand out of the box. 3 L R Fit the stand and mount together, making sure the notch on the mount aligns with the stand. 7 Insert 2 screws and secure the stand to the TV. x4 (M4 X L12) 4 Insert 4 screws and secure the stand to the TV. x8 (M4 X L12) Warning: Handling the TV incorrectly can result in injury. After setting the stand into the TV, we recommend not lifting the TV using the stand. Lift it by grabbing the front and bottom, as shown. [PF8500_QSG]BN68-05038A-01ENG. indb 2 2013-02-15 2:25:03 Step 2 Connect video devices We suggest using HDMI connections whenever possible for the best picture quality. Make sure all of them have been removed. Power on to start the initial setup. Connect to your network (wired or wireless) Search for channels from your TV service provider I don’t know where to plug in <device> Devices without HDMI may require the included A/V adapter. I have extra parts The TV includes some optional parts to help with wall mounting and cable routing. or After you have finished the initial setup, you can configure the universal remote control settings. These settings let the Smart Touch remote control external devices connected to the TV, such as a set-top box or Blu-ray player. If you experience issues, please do not take the TV back to the store. In the United States of America, call us at 1-800-SONY (1-800-726-7864) or visit us at www. For other countries, refer to "Contact SONY WORLDWIDE" in the user guide. [. . . ] For other countries, refer to "Contact SONY WORLDWIDE" in the user guide. [. . . ]