User manual SONY VPCEG26FX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VPCEG26FX. We hope that this SONY VPCEG26FX user guide will be useful to you.


SONY VPCEG26FX : Download the complete user guide (2114 Ko)

Manual abstract: user guide SONY VPCEG26FX

Detailed instructions for use are in the User's Guide.

[. . . ] If such interference occurs, please increase separation between this unit and the mobile telephone. ‰ To reduce the risk of fire, electric shock or product damage, – Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. € Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. € Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration. [. . . ] Do not place them near a television, personal computer or other devices easily influenced by magnetism. ‰ When this unit is turned on for the first time after purchase, a message prompting you to connect a Bluetooth® device (“PAIRING”) is displayed. (l 6) Additional Connection Connect an external music device (for AUX mode). Audio cable (not supplied) ∫ To select the sound input level of the external device 1 While in “AUX” mode, press [PLAY MENU] repeatedly to select “INPUT LEVEL” and then press [OK]. ‰ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. ‰ For details, refer to the instruction manual of the other equipment. Book 6 ページ 2013年1月15日 火曜日 午後1時4分 Bluetooth® operations By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this unit wirelessly. ‰ Refer to the operating instructions of the Bluetooth® device for details. Pairing Bluetooth® devices Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near this unit. ‰ If this unit is already connected to a Bluetooth® device, disconnect it. Bluetooth® transmission mode You can change the transmission speed to prioritize transmission quality or sound quality. To return all settings to the factory preset When the following situations occur, reset the memory: ≥ There is no response when buttons are pressed. (l below, “REMOTE ”) ≥ Is the battery depleted or is the battery inserted incorrectly?(l 4) Messages ENGLISH The following messages or service numbers may appear on the unit’s display. €AUTO OFF” ≥ The unit has been left unused for about 30 minutes and will shut down within a minute. ) 2 While pressing and holding down [Í/I] on the unit, reconnect the AC mains lead. ‰ Keep holding down [Í/I] until “--------” appears on the display. Note down the displayed number, disconnect the AC mains lead and consult your dealer. € When “REMOTE 1” is displayed, press and hold [OK] and [ , AUX] for more than 4 seconds. € When “REMOTE 2” is displayed, press and hold [OK] and [SOUND] for more than 4 seconds. ‰ The pairing of the device was unsuccessful or the registration has been replaced. ‰ For some built-in Bluetooth® devices, you have to set the audio output to “SC-NE1” manually. [. . . ] ‰ Be sure to install this unit as indicated within these operating instructions. 300 mm 67 mm 83 mm 122 mm 252 mm 169 mm 319 mm 570 mm 770 mm 12 VQT4U48 SC-NE1_EG~VQT4U48. Book 13 ページ 2013年1月15日 火曜日 午後1時4分 2 Attach the wall mount bracket to the wall with 2 screws (not supplied). (Both sides) ≥ Use a level to ensure both wall mount brackets are level. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VPCEG26FX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VPCEG26FX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.