User manual SONY VAIO VPCSB4DFX/B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPCSB4DFX/B. We hope that this SONY VAIO VPCSB4DFX/B user guide will be useful to you.


SONY VAIO VPCSB4DFX/B : Download the complete user guide (3793 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPCSB4DFX/B QUICK START GUIDE (1260 ko)
   SONY VAIO VPCSB4DFX/B CARE AND HANDLING OF YOUR VAIO COMPUTER (125 ko)
   SONY VAIO VPCSB4DFX/B RECOVERY, BACKUP AND TROUBLESHOOTING GUIDE (358 ko)

Manual abstract: user guide SONY VAIO VPCSB4DFX/B

Detailed instructions for use are in the User's Guide.

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. [. . . ] To select from which optional board section input signals are transmitted, select "01: INPUT SELECT" in the menu. When no signals are supplied to the selected board slots, the indicator flashes. If the destination address of the input signals and the address selected in the menu are different when the BKSM-T101 SDTI Input Board is installed, the indicator also flashes. To select the address of this unit, select "43: My ADDR-1""53:MY ADDR-2" in the menu. For more information, see "Menu Setup" (page 10). 5 AUDIO SEL indicators IN1 indicators CH1/2: Lights up if input signals from the optional board in the IN1 section are transmitted when; - The FEC RATE is 7/8 or - The FEC RATE is 3/4 and IN1 AUDIO CH is CH1/CH2. CH3/4: Lights up if input signals from the optional board in the IN1 section are transmitted when; - The FEC RATE is 7/8 or - The FEC RATE is 3/4 and IN1 AUDIO CH is CH3/CH4. When the BKSM-T103 Analog Input Board is installed and 3-pin XLR connectors are used, the indicator does not light regardless of the FEC RATE selection. To select the audio channels for the optional board in the IN1 section, select "47: IN1 AUDIO CH" in the menu. For more information, see "Menu Setup" (page 10). IN2 indicators CH1/2: Lights up if input signals from the optional board in the IN2 section are transmitted when; - The FEC RATE is 7/8 or - The FEC RATE is 3/4 and IN2 AUDIO CH is CH1/CH2. CH3/4: Lights up if input signals from the optional board in the IN2 section are transmitted when; - The FEC RATE is 7/8 or - The FEC RATE is 3/4 and IN2 AUDIO CH is CH3/CH4. When the BKSM-T103 Analog Input Board is installed and 3-pin XLR connectors are used, the indicator does not light up regardless of the selection of the FEC RATE. To select the audio channels for the optional board in the IN2 section, select "57: IN2 AUDIO CH" in the menu. For more information, see "Menu Setup" (page 10). 6 REF (reference signal) indicators IN1: Lights up when the reference signals are video signals from the input connectors of the optional board in the IN1 section. IN2: Lights up when the reference signals are video signals from the input connector of the optional board in the IN2 section. !TM AUDIO (AES/EBU) connectors (BNC type) Input 2-channel digital audio signals in AES/EBU format from the AES/EBU audio output connectors on external equipment. The back lighting for the MENU button lights up, and the menu appears in the display window. 1, 6 INPUT SEL ALOG SDI AUDIO SDI AEB/EBU REF IN1 IN2 VIDEO STD EXT 525 625 FREQ BW 36M 18M FEC RATE 7/8 ENTER 3/4 ALARM MENU ITEM 2, 4 RESET 2 3 Select "93: FACTORY SET" using the ITEM Â or µ button. To cancel returning to the factory setting Press the MENU, ITEM Â or µ button before pressing the ENTER button. 5 1 Press the MENU button. 3, 4 4 The back lighting for the MENU button lights up, and the menu appears in the display window. Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu. 2 3 Select a menu item to be changed using the ITEM Â or µ button. Use the " or " button to move a digit to the left or right. 10 Saving the Parameters in Menu Banks Menu banks are provided with the unit as well as the current bank. The menu banks can store the 8 sets of parameters saved in the current bank. Follow the procedure below to save the set of parameters in menu banks. Recalling the Parameters from Menu Banks Follow the procedure below to recall the set of parameters from the menu banks. 1, 5 INPUT SEL ALOG SDI AUDIO SDI AEB/EBU REF IN1 IN2 VIDEO STD EXT 525 625 FREQ BW 36M 18M FEC RATE 7/8 ENTER 3/4 ALARM MENU ITEM 2 RESET 1, 5 INPUT SEL ALOG SDI AUDIO SDI AEB/EBU REF IN1 IN2 VIDEO STD EXT 525 625 FREQ BW 36M 18M FEC RATE 7/8 ENTER 3/4 ALARM MENU ITEM 2 RESET 4 1 Press the MENU button. 3 4 1 Press the MENU button. 3 The back lighting for the MENU button lights up, and the menu appears in the display window. The back lighting for the MENU button lights up, and the menu appears in the display window. 2 3 4 Select "92: RECALL BANK" using the ITEM Â or µ button. Select the number of the desired menu bank to recall the contents into the current bank using the 4 or $ button. The contents of the selected menu bank are recalled to the current bank. To cancel recalling from the menu bank Press the MENU, ITEM Â or µ button before pressing the ENTER button. 2 3 4 Select "91: SAVE BANK" using the ITEM Â or µ button. Select the number of the menu bank in which the contents of the current bank to be saved using the 4 or $ button. [. . . ] In <-10dB mode, the level can be set from -10dB to -20dB, but the displayed parameter is <-10dB. QPSK: Outputs QPSK modulated wave OFF: Outputs no IF signals CW: Outputs continuous (non modulated) wave Selects the digital audio input signals if the BKSM-T102 SDI Input Board is installed in the IN1 section of the unit. SDI: Digital audio signals in SDI format AES/EBU: Digital audio signals in AES/EBU format Turns the audio emphasis function on or off if the BKSM-T103 Analog Input Board is installed in the IN1 section of the unit. 02 REF SELECT EXT IN1 IN2 03 VIDEO STD 525 625 OFF ON 0000 0001 : FFFF FFFF 08 PASSWORD 11 12 14 15 FREQ BW FEC RATE IF FREQ IF OUT LEVEL 36 MHz 18 MHz 7/8 3/4 140 MHz 70 MHz 0dB. . -10dB <-10dB -20dB QPSK OFF CW SDI AES/EBU 16 CARRIER 41 IN1 SDI AUDIO 42 IN1 EMPHASIS OFF ON 12 Item number 43 Item MY ADDR-1 Parameter 0000 0000···FFFF Function Sets an address for the unit itself if the BKSM-T101 SDTI Input Board is installed in the IN1 section of the unit. When the address matches the destination address of the input signals, the unit receives them. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPCSB4DFX/B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPCSB4DFX/B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.