User manual SPECO DVR-4CF

[. . . ] DVR-4CF USER MANUAL Speco Technologies 200 New Highway Amityville, NY 11701 631-957-8700 INDEX 1. SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. 1 PRODUCT INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. 2 APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. [. . . ] Front Panel Button Definition (2) QUAD (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) : Press this button under monitoring or quad mode to show quad display. CH 1 : Press this button under monitoring or record mode to show CH 1 in full-screen. CH 2 : Press this button under monitoring or record mode to show CH 2 in full-screen. CH 3 : Press this button under monitoring or record mode to show CH 3 in full-screen. CH 4 : Pres this button under monitoring or record mode to show CH 4 in full-screen. SEQ : Press this button under monitoring or record mode, all channels are displayed full-screen in turn repeatedly. MENU : Press this button under monitoring mode to enter setup menu and under setup mode to return to the previous selection. REC LED : LED lights while recording. 7 DVR-4CF (13) (14) (15) (16) (17) (18) (19) (20) (21) PLAY LED MENU LED STOP LED REC STOP PAUSE REW PLAY F. F. : : : : : : : : : LED lights while playing playback. Press this button under playback mode to start fast-forward scanning. (22) CF-CARD SLOT 8 DVR-4CF 6. 2 Rear Panel Buttons and Controls (1) RJ45: Internet connection terminal (optional). (7) I/O Block [I/O BLOCK]: Terminal function description is shown below. Function Ground Terminalsignal Alarm Input Terminal Ground Terminalsignal Alarm Input Terminal Ground Terminalsignal Alarm Input Terminal Ground Terminalsignal Alarm Input Terminal Alarm Output (Normal Open) Alarm Output Terminal (NC/ NO COM) Alarm Output (Normal Close) 9 DVR-4CF 7. OPERATING PROCEDURE 7. 1 Power On Each time after power on, DVR will auto-detect its peripherals (self-testing, warm-up, auto detects the hard disk and starts CF-card testing, and etc. ) The system will detect the video input and judge whether the video system is NTSC or PAL. When video input is unable to be detected (VIDEO LOSS), the system will send out an alarm, press-on any button to stop the alarm (it will not affect the actual recording). 7. 2 Monitoring Mode This mode is a default for our system after power on. PressRECbutton, the system enters the record mode, press PLAY button to start playback, press MENU button to enter the menu setup display. During record or playback, pressSTOPbutton to stop the current activity and returns to monitoring mode. Press again to change the speed (FF1, FF2 or FF3), or pressREWbutton to start reverse playback. When coping data from the hard disk to a CF card, make sure that the data has been completely copied onto the CF card, before withdrawing it from the slot. Otherwise, error may occur, system displays "CF CARD REMOVED", and auto returns to live display. Camera name may only be viewed during recording display and under live display. 13 DVR-4CF 8. SYSTEM SETUP 8. 1 Menu 1 (3) > SYSTEM SETUP CAMERA SETUP RECORD SETUP BUZZER SETUP EVENT LIST CF CARD SETTING HARD DRIVE SETUP (4) PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT (2) (1) MAIN MENU: Item subject (First menu layer does not have a subject). First Menu Layer (Main Menu) Second Menu Layer Third Menu Layer Fourth Menu Layer (3) Menu Operation and Setup Pressorbutton to move the cursor ( > ). PressMENUbutton: Under second or third menu layer, the system will return to the previous menu layer (second layer to first layer or third layer to second layer) and auto updates the modified data. [. . . ] Under this menu layer user may setup "TIME SERACH" or "EVENT SEARCH". 28 DVR-4CF 8. 6. 1 TIME SEARCH TIME SEARCH 05/01/13 192716 BEGIN TIME END TIME 05/01/13 192716 05/01/15 150006 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. PressPLAYbutton to play. 29 DVR-4CF 8. 6. 2 EVENT SEARCH EVENT SEARCH BEGIN 05/01/15 150001 > 01 ALARM 02 MIX 03 TIME 04 ALARM END 05/01/15 150006 2005/01/15 150001 2005/01/15 140001 2005/01/15 130001 2005/01/15 120001 PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. EVENT SEARCH: Displays all recording events, every page consists of 7 events, and maximum 63 stored events. BEGIN 05/01/15 150001 END 05/01/15 150006 Displays the beginning and end time of each event. 30 DVR-4CF 8. 7 CF Card Setup CF CARD SETUP > COPY FORMAT/ERASE TOTAL CAPACITY REMAINING CAPACITY 512MB 100MB PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. [. . . ]