User manual SPECO DVR-X4IP

[. . . ] DVR-X4/IP Operating Instructions Four Camera DVR System SPECO TECHNOLOGIES 200 New Highway Amityville. 631-957-9142 www. specotech. com 1 Digital Video Recorder 4 Channel Digital Video Recorder The Factory Default Password is: ADMIN (Administrator): 1 Please refer to page 14 of this manual for "Operation and Setup" Do not change the password before reading this entire manual. 2 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This label may appear on the bottom of the unit due to space limitations. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated " dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance (Servicing) instructions in the literature accompanying the appliance. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE. Attention: installation should be performed by qualified service Personnel only in accordance with the National Electrical Code or applicable local codes. 3 Power Disconnect. [. . . ] MARK IMAGE (Internal backup) SETUP During Playback, press PIP/MARK button and choose pictures using to protect selected pictures from being overwritten when hard disk is full button 22 4. Setting 1. Basic Operation SYSTEM SETUP DISPLAY SETUP CAMERA TITLE TIME/DATE SETUP ALARM/MOTION SETUP RECORD SETUP TCP/IP SETUP MISCELLANEOUS FACTORY DEFAULT SELECTUP/DOWN , ENTER Basic Screen of the Main Menu (1) Press MENU button. (2) Log into the system by entering the password with 1. 2. 3. 4 button and press MENUbutton to enter SETUP MENU. (3) Use button to select setup item. (4) Press PLAY/ENTER button to enter sub-menu of selected SETUP. (5) Press sub-menu item with button, and change the value with button. (6) Press PLAY/ENTER button to forward MENUbutton to go backward. (7) To go back to the very first SETUP condition, select FACTORY DEFAULT. Items that remain unchanged when FACTORY DEFAULT is selected. value of TIME/DATE SETUP ( Date stored on HDD Marked image (Internal backup) ADMIN password ALARM LIST SETUP We recommend users to set FACTORY DEFAULT as the first operation. 23 2. DISPLAY SETUP This is about the contents displayed on the display screen. A E C DISPLAY TIME/DATE CAMERA TITLE PB TIME/DATE PB CAMERA TITLE DVR STATUS BORDER SET SEQUENCE INTERVAL SETUP : : : : : : : ON ON ON ON ON WHITE 01 1 2 3 4 5 6 7 2002/ARP12 60FPS REC AM 07:40:38 B CAM1 CAM2 D SELECT , PRESS CAM3 CAM4 F Basic Menu ofDISPLAY SETUP Parts changed by setup 1 TIME/DATE : A Date and time is indicated on LIVE screen. is indicated on LIVE screen. Date and Time is indicated. 2 CAMERA TITLE : Camera TITLE B PB TIME/DATE : On Playback screen, C 3 4 5 6 PB CAMERA TITLE : Camera TITLE D SCREEN. DVR STATUS : E is indicated on the Replay indicates DVR condition, such as REC/REPLAY. F BORDER SET :Changes the color of the border - WHITE/ BLACK 7 SEQUENCE INTERVAL : With SEQ SPEED button, select the interval time of the rotating screen. ( Time interval from 1 second to 99 seconds) 24 3. CAMERA SETUP CAMERA COLORSETUP TITLE SETUP ACTIVE CH SETUP SCREEN POSITION SETUP COLOR BARTEST SETUP 1 2 3 4 5 CAMERA COLOR SETUP CHNUMBER BRIGHTNESS CONTRAST SATURATION HE U GAIN 1 +2 -2 -8 +0 +0 SELECT , PRESS SELECT , PRESS Basic Menu of Camera Setup Image Setup Screen of Camera (1)COLOR SETUP : Adjust Camera Image CHNUMBER BRIGHT NESS CONTRAST SATURAT ION HUE GAIN : Select camera : Adjust screen brightness : Adjust color contrast : Adjust color saturation : Adjust color hue : Adjust imagesignal level (-31~ (-31~ (-20~ (-31~ (-31~ +32) +32) +32) +32) +32) Correct adjustment of each element in COLOR setup will increase the picture quality being displayed. We recommend you adjust each element of COLOR SETUP for cameras and monitor to be connected to the DVR unit. CAMERA TITLE SETUP 01 23 45 67 89. , < >( )-= A BC D E FGH IJK LMNOP QRS TUV W X Y Za b c d ef gh I j k l mnop qrs t uv w x y z CH1 CH2 CH3 CH4 (CAM (CAM (CAM (CAM 1 2 3 4 ) ) ) ) SELECT ENTER , PRESS Basic Screen for Entering Camera Name (2) TITLE SETUP : Input TITLE of each camera Use button to select CHANNEL and press PLAY/ENTER button button to move to item to be changed and Go into CHANNEL content and use use button 25 When modification is finished, press MENU button to come back to the MAIN MENU. button, move to item to be changed, and press PLAY/ENTER button to select STATUS : In normal cable condition it is indicated as ACTIVE, and when the cable is disconnected or has problem, it is indicated as LOSS. (REC : Decide whether to record relevant channel or not. ) (4)SCREEN POSITION SETUP Use button to move the full screen according to the users needs. (5)COLOR BAR TEST : COLOR BAR CHART is generated. TIME/DATE SETUP TIME/DATE SETUP 1 2 SET TIME/DATE SET TIME/DATE SET TIME/DATE TYPE YEAR MONTH D AY HOUR MINUTE SECOND 2002/APR/15 PM 09:23:17 SELECT , PRESS SELECT , PRESS (1)SET TIME/DATE : User can set year/month/time/minute/second Use button to assign Year/Month/Time/Minute/Second and use button to change the value. . (2)SET TIME/DATE : HOUR DISPLAY : Changes to AM/PM or 24hour time indication DATE DISPLAY: Converts into Asian type/American type/European type MONTH DISPLAY:MONTH Indication is changed to English or Number TIME/DATE TYPE SETUP HOUR DISPLAY DATE DISPLAY MONTHDISPLAY : AM/PM : ASIAN : ENGLISH SELECT , PRESS T ime/DateNotation 27 5. ALARM/MOTION SETUP ALARM NO LIST SETUP ALARM/MOTION ALARMSETUP ALARM LISTSETUP MOTION SETUP MOTION MASK SETUP SETUP 1 2 3 4 DATE TIME TYPE CALM ''''''''''''''''''''' 001 02/04/01 21 : 14 : 11 3_H_ . SORT : TIME DELETE GOTO SELECT , ENTER OR MODE C: CAMERA A : ALARM L : LOSS M :MOTION Mov e to play s creen ofrelate appropriate time. SELECT , PRESS 1 2 3 Sort method SORT CH TIME TYPE DELETE MARK PAGE ALL (1)ALARM SETUP : Matches the polarity of sensors externally installed. ALARM POP-UP : When an alarm is activated, display screen is switched to full screen of image from relevant channel, and the color of camera number is changed to red. If total alarm exceeds 400, it overwrites from the beginning. 28 With button, select SORT, DELETE or GO TO. (SORT: Press PLAY/ENTER button to select submenu of SORT. 1)CH: Sort by CHANNEL 2)TIME: Sort by TIME 3)TYPE: Sort by TYPE (DELETE: Press PLAY/ENTER button when DELETE is highlighted, and select MARK, PAGE or ALL using button and press PLAY/ENTER button. [. . . ] (4)PANTILT COMMAND SETUP : When PAN/TILT CONTROLLER that this system does not support is connected to this DVR, enter appropriate command in PANTILT COMMAND SETUP. Detailed procedure shall be provided upon request. 36 (5)HDD INFORMATION HDD DATA LIST: Shows general information of HDD. HDD AUTO DETECT: Allows unit to detect HDD. (6) MARK IMAGE SETUP (Internal backup) MARK IMAGE is a very useful function, because it protects marked images from being overwritten. During playback, you can mark images to store them on the HDD even after HDD starts to overwrite. At paused mode, press selected. [. . . ]