User manual STANDARD HORIZON CP170C

[. . . ] CP160/CP170C GPS Chartplotter Owner's Manual ZOOM IN ZOOM OUT ENTER CLEAR MENU GOTO MARK ROUTE PWR MOB Attenzione! L'esposizione del display ai raggi ultravioletti può accorciare la vita dei cristalli liquidi usati nel vostro plotter cartografico. Questo limite è dovuto alla tecnologia costruttiva degli attuali display. Evitare inoltre che il display si surriscaldi per non causare una diminuzione di contrasto che, in casi estremi, può rendere lo schermo completamente nero. Tale condizione è comunque reversibile durante il raffreddamento. Warning! Exposure of display to UV rays may shorten life of the liquid crystals used in your plotter. [. . . ] 3) "PREVIOUS" to move Destination to the previous Waypoint of the Route. When the Destination is on the first Waypoint this option is not present. 4) "HIGHWAY" to bring up the Highway page (see Section 3. 2. 3). 4. 6 MOB FUNCTION Is an important function useful in case someone or something falls overboard. 4. 6. 1 Inserting MOB Press 'MOB' to place MOB symbol at ship's coordinates: Figure 4. 6. 1 - Placing MOB 4. 6. 2 Deleting MOB Place cursor on MOB, press 'ENTER, select "DELETE" and press 'ENTER' again. 4. 7 USING THE TRACK FUNCTIONS The chartplotter can be set up to record your Track as you move and for plotting on the chart. Page 50 GPS Chart 160/170C 4. 7. 1 Enabling Track storing 'MENU' + "TRACK" + 'ENTER' + "TRACKING" + 'ENTER' To enable (On) or disable (Off) the Track storing. It is not possible to use the Track storing if you are not receiving a valid fix. The default setting is On. 4. 7. 2 Selecting active Track 'MENU' + "TRACK" + 'ENTER' + "ACTIVE TRK" + 'ENTER' Select the number of the active Tracks. The default setting is 1. 4. 7. 3 Displaying Track 'MENU' + "TRACK" + 'ENTER' + "VISIBLE" + 'ENTER' To enable (On) or disable (Off) the displaying of Track. The default setting is On. 4. 7. 4 Selecting Track Line Pattern 'MENU' + "TRACK" + 'ENTER' + "LINE PATTERN" + 'ENTER' Selects the desired Line Pattern for the active Track. Only for CP 170C: "Line Pattern" item is substituted by the "Color" item, to select the desired color among the 8 colors available for the selected Track. 4. 7. 5 Deleting Track 'MENU' + "TRACK" + 'ENTER' + "DELETE" + 'ENTER' Deletes all Track. After pressing 'ENTER' a warning window appears: select "YES" and press 'ENTER' to confirm (select "NO" otherwise). 4. 7. 6 Selecting Track memorizing type 'MENU' + "TRACK" + 'ENTER' + "STEP UNIT" + 'ENTER' Choose Distance (Dist) - the chartplotter can store a fix when the distance from its last stored position is greater than a defined distance; Time - the chartplotter can store a fix after a defined time. The default setting is Time. 4. 7. 7 Selecting distance 'MENU' + "TRACK" + 'ENTER' + "DISTANCE" + 'ENTER' When the tracking function is On and the type of Track storing is Distance, you can store a fix when the distance from its last stored position is greater than a defined distance. Choose in the range 0. 01, 0. 05, 0. 1, 0. 5, 1. 0, 2. 0, 5. 0, 10. 0 Nm (the distance unit of measure is selected by the user, see Section 8). The default setting is 0. 01 Nm. 4. 7. 8 Selecting time 'MENU' + "TRACK" + 'ENTER' + "TIME" + 'ENTER' GPS Chart 160/170C Page 51 When the tracking function is On and the type of Track storing is Time, the chartplotter can store a fix after a defined time. The default setting is 1 sec. 4. 8 USER C-CARD MENU The chartplotter allows copying information to a User C-CARD. You can also return the information to internal memory at a later time. 'MENU' + "USER C-CARD" + 'ENTER' or press any soft key + 'C-CARD' (if it is present) 1 Time of file creation 2 Date of file creation 3 Type of data contained in the file (Mark file, Waypoint file. . . ) 4 5 6 7 SLOT 1 FILE 1 MRKS 2 WPTS 5 RTES 1 TRKS 566 SAVE LOAD DELETE FORMAT CHANGE 1 2 4 Number of selected Slot 5 File name 6 Number of Selected file Information on stored User 7 Points on Internal Memory 3 Figure 4. 8 - User C-CARD Menu 4. 8. 1 Saving File 'MENU' + "USER C-CARD" + 'ENTER' + "SAVE" + 'ENTER' or press any soft key + 'C-CARD' (if it is present) + "SAVE" + 'ENTER' A window is opened to insert the file name and the type of data to save: SLOT 1 FILE 1 MRKS 2 WPTS 5 RTES 1 TRKS 566 SAVE LOAD DELETE FORMAT CHANGE WPTS Figure 4. 8. 1 - Save File function (I) Page 52 GPS Chart 160/170C Select the file name and press 'ENTER'. At first a default name is shown: use the ShuttlePoint knob to insert the name. Select the data type to save among "MARK", "ROUTE" or "TRACK". NOTE When naming a file, you may have trouble finding a name that uniquely identifies the file's contents. Dates, for example, are often used in filenames; however, they take up several characters, leaving you with little flexibility. The secret is to find a compromise, a point where you can combine a date with a word, creating a unique filename. The characters may be numbers (0, . . . , 9), letters (A, . . . , Z) and spaces (for example legal identifiers are "ABC", "AA", "12121212", "A B C", "1 A 1", and so on. On the screen appears: SLOT 1 FILE 1 MRKS 2 WPTS 5 RTES 1 TRKS 566 SAVE LOAD DELETE FORMAT CHANGE Figure 4. 8. 1a - Save File function (II) 4. 8. 2 Loading File 'MENU' + "USER C-CARD" + 'ENTER' + "LOAD" + 'ENTER' or press any soft key + 'C-CARD' (if it is present) + "LOAD" + 'ENTER' Before pressing 'ENTER', choose file name in the list shown on the screen using the ShuttlePoint knob. 4. 8. 3 Deleting File 'MENU' + "USER C-CARD" + 'ENTER' + "DELETE" + 'ENTER' or press any soft key + 'C-CARD' (if it is present) + "DELETE" + 'ENTER' Before pressing 'ENTER', choose file name in the list shown on the screen using the ShuttlePoint knob. [. . . ] The default setting is On. 'MENU' + "TRACK" + 'ENTER' + "VISIBLE" + 'ENTER' WAAS = Wide Area Augmentation System The Federal Aviation Administration (FAA), in cooperation with other DOT organizations and DOD, is augmenting the GPS/SPS with a satellite-based augmentation system, the Wide Area Augmentation System. It will provide a signal-in-space to WAAS users to support en Route through precision approach navigation. After achieving initial operational capability, the WAAS will then be incrementally improved over the next years to expand the area of coverage, increase the availability of precision approaches, increase signal redundancy, and reduce operational restrictions. A sequence of Waypoints makes up a Route plan. Inserting Waypoint: 'ENTER' + "ROUTE" + 'ENTER' Moving Waypoint: Place cursor on existing Waypoint +'ENTER' + "MOVE" + 'ENTER' + move cursor + 'ENTER' Deleting Waypoint: Place cursor on existing Waypoint + 'ENTER' + "DELETE" + 'ENTER' Editing Waypoint: Place cursor on existing Waypoint + 'ENTER' + "EDIT" + 'ENTER' + Modify symbol, Cursor and coordinates (Color Only for CP 170C) + 'ENTER' Inserting Waypoint: Place cursor on Route leg + 'ENTER' + "INSERT. " + 'ENTER' + move cursor + 'ENTER' Finding Waypoint: 'MENU' + "FIND" + 'ENTER' + "USER POINTS" + 'ENTER' (NMEA) Wind Speed Trend page 'MENU' + "NMEA DISPLAY" + 'ENTER' + "WIND SPEED TREND" + 'ENTER' or press any soft key + 'WIND' (if it is present) Shows the graph of the Apparent Wind Speed received from the NMEA Port. [. . . ]