User manual STANTON C.324

[. . . ] Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215. 9*279. 4mm Pages 12 PROFESSIONAL TABLE TOP CD PLAYER C. 324 USER'S MANUAL Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215. 9*279. 4mm Pages 12 IMPORTANT SAFETY PRECAUTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before this product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the appliance and in the operating instructions should be followed. [. . . ] Check the following links for specific instructions: Windows: http://support. microsoft. com/kb/309522/en-us Mac:http://docs. info. apple. com/article. html?artnum=303599 EJECT FUNCTION Press the eject button to eject the disc. This prevents accidentally ejecting the disc when in play mode. SELECTING TRACKS Whether using MP3 or standard audio discs, tracks can be selected in one of two ways: Select the desired track by pressing the Track BACK or FORWARD buttons to move to the previous or next track. When a new track is selected during playback, playback begins as soon as the track selection is completed. While the track number is flashing, push down on the encoder to select the track. If it is an MP3 disc with folders, use the FOLDER encoder to browse folders as desired. The FOLDER button will light up when in Folder mode. CD SLOT IN Insert your CD in the CD Slot. When inserting a CD of 12cm in diameter, use a conventional adapter. 7 Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215. 9*279. 4mm Pages 12 OPERATING INSTRUCTIONS Press the PLAY/PAUSE button during the pause or cue mode to start playback. The PLAY/PAUSE button illuminates with a solid green light during playback. STARTING PLAYBACK STOPPING PLAYBACK There are two ways to stop playback. Press the PLAY/PAUSE button during playback to pause at that point, or press the CUE button during playback to return to the position at which playback started. Once the PITCH BEND + button is released the pitch will return to the pitch set by the PITCH SLIDER. The jog wheel can also be used to temporarily bend the pitch of the music during normal playback. Rotate the wheel clockwise to speed up and counterclockwise to slow down. The speed that you rotate the jog wheel determines the percent of pitch bend. It is recommended that you use the outer edge of the jog wheel for this type of control, as touching the top surface may cause interruption of playback in certain modes of operation. Key Lock This function allows the tempo or BPM of the music to be altered without affecting the musical key. This is handy when accelerating tracks to avoid the chipmunk effect. CUEING Cueing is the action of preparing tracks for playback. When the CUE button is pressed, playback returns to the cue point and enters pause mode. When the PLAY/PAUSE button is pressed during the cue mode, playback starts. Playback can also be resumed from cue mode by pressing the PLAY/PAUSE while holding the CUE button. Auto Cue The unit's Auto Cue function will automatically set the first cue point at the beginning of each track. Cue Setting Cue Points There are several ways to set and recall cue points, either in real-time to enhance a performance and create cool effects, or offline for fine adjustments. During playback, press any empty memory pad to set a cue point on the fly. The pad's indicator will flash red while saving the cue point, and then turn to green to show it is ready for playback. [. . . ] You can set a cue point on the standby player to jump directly to that point. WARRANTY & RETURN POLICY Warranty Through Stanton's authorized dealers around the World, Stanton, or one of Stanton's authorized distributors outside the U. S. , will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one year following the date of original purchase. Exceptions to this warranty are as noted below: The warranty for mechanical parts which are subject to wear and tear are limited to the earlier of either thirty (30) days following the date of original purchase or the following number of cycles: Faders - 15, 000; Rotary potentiometers - 10, 000; and Switches - 10, 000. Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty. [. . . ]