User manual STANTON C.400

[. . . ] NOTE: This unit may cause interference to radio and television reception. Line Voltage Selection (for multiple voltage model only) The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel, using a screwdriver. Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage. If the VOLTAGE SELECTOR switch does not move smoothly, please contact a qualified serviceman. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK) . [. . . ] (18) JOG (JOG dial) When the dial is turned during CD pause, the point at which the sound is being produced mover by a number of frames corresponding to the number of clicks. Clockwise moves the point forward, counterclockwise moves the point backward. Press the OPEN/CLOSE button to open and close the disc holder. LCD (3)~(6)Track, Minute, Second and Frame Displays These displays indicate information for the CD's current position and time. the total disc remaining time. (9) SINGLE Indicator When SINGLE lights off, the CD player will play tracks continuously. (11) PITCH DISPLAY This shows the BPM change range (the BPM changes within a range of +/-16%). (7)BAR Indicator These ten indicators provide a visual display of the approximate position of the pickup within the current track. (8)TOTAL/REMAIN Indicator When "TOTAL" and "REMAIN" are indicated in the LCD DISPLAY the TIME DESCRIBED in the LCD will define OPERATIONS 1. The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. Loading discs Hold the disc by the edges and place it in the disc holder, then press the OPEN/CLOSE button again to close the disc holder. The unit will show the total track number and the total playing time for about 2 seconds then enter the cue condition. The cue point will be set to the music starting point of the first track automatically. CAUTION: Do not place any foreign objects in the disc holder, and do not place more than one disc in the disc holder at a time. Do not push the disc holder in manually when the power is off, as this may result in malfunction and damages the player. 3. Selecting Tracks Press the TRACK button once to move to next higher or lower track. Hold the TRACK button to change tracks continuously at a higher speed. When a new track is selected during playback, playback begins as soon as the skip search operation is completed. button is pressed while at the last track, the first track is selected. In the same way, if the TRACK If the TRACK button is pressed while at the first track, the last track is selected. 4. Starting Playback Press the PLAY/PAUSE button during the pause or cue condition to start playback, the PLAY indicator lights. The point at which playback starts is automatically stored in the memory as the cue point. The pickup then returns to the cue point when the CUE button is pressed. Stopping Playback Figure 4-1 There are two ways to stop playback. Press the CUE button during playback to return to the cue point and enter pause condition. (Back Cue) CUE Figure 5-1 OPERATIONS 5B. Pausing Press the PLAY/PAUSE button to switch between play and pause. [. . . ] Any returns to a non-authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty. To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized Stanton dealer's return policy. Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise. Stanton's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. [. . . ]