User manual STANTON DIGIPAK

[. . . ] Power Sources This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer the operating instructions. Grounding or Polarization This product may be equipped with a polarized alternation-current line plug (a plug having one blade wider than the other). [. . . ] Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage. If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman. 230V 3) NOTE ON USE Allow for sufficient heat dispersion when installed on a rack. Unplug the power cord when not using the set for long periods of time. (For sets with ventilation holes. ) Do not let foreign objects in the set. Do not let insecticides, benzene, and thinner come in contact with the set. Never disassemble or modify the set in any way. S-250 FUNCTIONS 1 14 2 ELAPSED REMAIN SINGLE CONTINU 13 3 12 11 4 10 5 6 7 8 9 21 15 16 17 18 19 20 S-250 FUNCTIONS 1) EJECT: Opens the CD door 2) STOP: Stops the CD. Keep the or button pressed for a few seconds to change the scan speed. 18) VOLTAGE SELECTOR: Used to select the unit's voltage according to the local setting. Note: The voltage should preset correctly from the factory, however, make sure to check it before powering the unit. 21) PHONES: Use this stereo jack to connect a pair of headphones. 5) PLAY/PAUSE: Plays or pauses the CD. Autocue function sets the cue point automatically when this button is used. 7) TIME: LCD display reads the time remaining or time elapsed, according to this button. 9) PITCH SELECT: Pressing the PITCH and PITCH BEND - (minus) buttons simultaneously changes the pitch fader range between +/- 8, 12, and 16%. If the pitch fader is already physically set to 16%, this function will not work. 12) LOOP: Press once to set starting loop point, press again set ending point and enter loop. 13) LCD DISPLAY: Shows time (minutes, seconds, frame), and pitch information. 15) AUDIO OUT: This stereo line output connects to the line input on any DJ mixer. 16) DIGITAL OUTPUT: This coaxial (S/P DIF) digital output connects to any RCA S/P DIF input, as found on most standard computer sound cards or CD burners. 17) FADER START: Connects to any DJ mixer equipped with a fader start input. This enables the user to start the CD from the cue point, using the mixers cross or line fader, depending on the mixer. SMX-211 FEATURES Compact design User replaceable crossfader 2 phono, 2 line, 1 microphone input Gain, Treble, and Bass Controls on Channels Powerful stereo headphone output Cue Pan Selector (Ch. 1-Ch. 2) Bright LED Output Indicators Selectable Fader Start (Ch. 1-CH. 2) SMX-211 MIXER FEATURES 6 4 11 10 9 3 2 1 5 7 8 MIC SMX-211 MIXER FEATURES TOP & FRONT PANEL 1. Input fader - Controls individual source levels (channels) in the mix. Input toggle switch - Selects which source will be active based on what you have connected to the rear panel input section (phono/line). [. . . ] Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise. Stanton's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of merchantability or fitness for a particular purpose. [. . . ]