User manual STANTON DIGIPAK PRO V4

[. . . ] Read Instructions ­ All the safety and operating instructions should be read before this product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the appliance and in the operating instructions should be followed. Follow Instructions ­ All operating and use instructions should be followed. [. . . ] When this is not illuminated, the CD will play continuously through all tracks. LOOP ­ Indicates when the CD is in loop mode. 9 SETUP CHECKING THE CONTENTS C. 324 CONNECTIONS Make sure that the unit and any other equipment in the signal chain are turned off prior to making any connections. Connect the RCA cable to the rear of the unit and to the input on your mixer. Connect the power cable to the rear of the unit and to a proper AC outlet. Using other types of cables may result in damage to the unit. Check that the carton contains all of the following items. Tabletop CD player unit Printed user's manual One RCA cable One power cable One fader start / relay cable INSTALLING THE UNIT Place the unit on a flat, level surface. Be sure the player is in a well-ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable interference. The player will work normally when the unit is within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not insert or eject properly, or playback may be adversely affected. The unit's LCD screen is designed to be clearly visible within the angles shown in the right figure. Place the unit so that the LCD screen is within this visual range for optimal clarity. To avoid severe damage to the unit, be sure power is OFF when making any connections. Sight point 10 45 OPERATING INSTRUCTIONS UPDATING FIRMWARE Checking Firmware Version Turn the unit off. Hold down the MODE button (under SAMPLE SEQUENCER) while powering up the unit. Updating The Firmware Firmware updates may, as necessary, become available from Stanton's website (www. stantondj. com) as downloadable ISO files, which are needed to create a bootable CD. We recommend using Magic ISO Maker (www. magiciso. com) PC software to burn the disc. Once you have burned a bootable disc from the ISO file, insert the CD into the C. 324. Turn the unit off and back on to complete the update process. REAR C. 324 DO NOT POWER OFF UNIT WHILE DISC IS INSERTED Removing the disc from the drive before powering off will insure that the laser pickup remains properly calibrated over time. Leaving a disc in the device while powering off could also cause the jog wheel sensitivity to shift, as the same "memory" is shared between laser pickup and jog wheel calibration data. See "Jog Wheel Sensitivity "on page 11 for information. BURNING When burning CD-Rs or CD-RWs for the C. 324, it is strongly recommended to set your burner at 8x write speed. Check the following links for specific instructions: Windows: http://support. microsoft. com/kb/309522/en-us Mac:http://docs. info. apple. com/article. html?artnum=303599 SELECTING TRACKS Whether using MP3 or standard audio discs, tracks can be selected in one of two ways: Select the desired track by pressing the Track BACK or FORWARD buttons to move to the previous or next track. When a new track is selected during playback, playback begins as soon as the track selection is completed. While the track number is flashing, push down on the encoder to select the track. If it is an MP3 disc with folders, use the FOLDER encoder to browse folders as desired. [. . . ] Press either the PLAY or CUE button to wake it up. 14 SPECIFICATIONS APPLICATION POWER SUPPLY Model C. 324 C. 324 AC 100V, 50/60Hz (For Japan) AC 110V, 60Hz (For Taiwan) AC 120V, 60Hz (For U. S. A. , Canada, Mexico) AC 220V, 50Hz (For United Arab Emirates, Chile, Argentina) AC 220V, 60Hz (For Philippines) AC 230V, 50Hz (For Europe, New Zealand, South Africa, Singapore, Israel) AC 240V, 50Hz (For Australia, U. K. ) 17W 318 (W) x 358 (D) x 109. 5 (H) mm 4. 48Kgs POWER CONSUMPTION: DIMENSIONS WEIGHT AUDIO CHARACTERISTICS ITEM TYPICAL LIMIT Output Level 2Vrms+/-0. 5dB 2Vrms +/-1dB Channel Balance Within 0. 5dB Within 1dB Frequency Response 20-20KHz +/-0. 3dB 20-20KHz +/-1dB De-Emphasis -20dB+/-0. 1dB -20dB+/-1dB Channel Separation (*2) 94dB 90dB THD+N (*1) 0. 005% 0. 01% S/N (*2) 127dB 100dB NOTE: *1: WITH 20KHz LOW PASS FILTER. SEARCHING TIME (TESTDISC: TCD-792) ITEM (1) Short access time (2) Long access time PLAY ABILITY ITEM (1) (2) (3) (4) (5) Interruption Black Dot Finger Prints Eccentricity Vertical deviation TYPICAL 1mm 1mm 75um 140um 1mm LIMIT 0. 7mm 0. 6mm 65um 140um 0. 5mm TYPICAL 2sec 4sec LIMIT 4sec 6sec CONDITION 1KHz, 0dB 1KHz, 0dB 0dB OUTPUT 16KHz, -20dB 1KHz, 0dB 1KHz, 0dB 1KHz, 0dB CONDITION Play next track Track 1Track20 Track 20 Track 1 CONDITION TCD-725 TCD-725 TCD-725 TCD-712 W/O TRACK JUMP TCD-731R GENERAL System Compact Disc Digital Audio Disc Loading Slot in Display LCD Pitch Control Range Within +/-8%, +/-16%, +/-25%, +/-100% Pitch Bend +/-8% Pitch Accuracy +/-0. 15% NOTES (1) The specifications are subject to change to any improvement by negotiations in advance. (2) The parts are subject to change to any improvement within the range of the specifications. MP3 FORMAT Disc Format MP3 Format Disc Writing Method Applicable file extensions ISO9660 Joliet CD-ROM sector format Max. [. . . ]