User manual STANTON PRO-30

[. . . ] dealer are dedicated to your complete satisfaction by offering benchmark service and support throughout the long life of your Next!Again, we appreciate your patronage, and look forward to many years of making music together. Low frequency hum while operating source unit. Problem Excessive hum when using phono source. Cause Poor ground connection. Solution Properly connect turntable ground wire to mixer ground terminal. [. . . ] · To prevent overheating, always provide your mixer with adequate ventilation air space. · To avoid damage due to AC voltage peaks, always disconnect your mixer from the power source during electrical storms. The manufacturer is not responsible for any damage or personal injury resulting from unauthorized user-servicing or modifications. In addition, the warranty will be void if any unauthorized service by the user is detected. Always return you mixer to an authorized Stanton dealer for servicing. The amplifier is turned up, but there is no signal. Faulty output connections Improper level adjustment. No signal in headphones. Improper connection. Improper level or cue mix settings. D E S C R I P T IO N O F FU N C TI O N S 7. Fader Start controls: Activate the Fader Start function when connected to a CD player with fader start capabilities (such as the Next!When fader start is engaged, the CD player can be started and paused by the crossfader. Master level control: Controls the overall signal output level of the Master output 11. Booth level control: Controls the overall signal output level of the Booth output 12. Cue select: 3 position selector switch dtermines what is heard in the headphones, channel 1, 2, or master output 14. Mic EQ: Individual controls for low and high frequencies equalization with (+/-12 dB) Any changes made to EQ settings will change the overall microphone output level. Ground connector: Connects to the turntable ground connector to eliminate electrical hum. Phono/CD inputs: Switchable line / phono signal inputs for channels 1 and 2 21. Phono/CD selector switches: Switches CD/Phono inputs for channels 1 and 2 between line and phono 23. Fader Start output: Connects to the fader start inputs of CD players with fader start function such as the Next! [. . . ] dealer. WA R R A N T Y This unit has been designed and manufactured using quality components. Therefore, it is warranted to be free from defects in materials (limited as specified below), and workmanship for a period of thirty six (36) months from the original purchase date. During this period, all service and parts necessary to repair a defect will be free of charge. [. . . ]