User manual STANTON S.252

[. . . ] When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug the apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. [. . . ] Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Avoid exposure to beam of laser. CAUTION: To reduce the risk of electric shock, do not remove any cover. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. CAUTION: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. Line voltage selection (for multiple voltage model only) 1) The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the main unit, using a screwdriver. 2) Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage. 3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualifited serviceman. 1 NOTE ON USE · Allow for sufficient heat dispersion when installed on a rack. · Unplug the power cord when not using the set for long periods of time. (For sets with ventilation holes. ) · Do not let foreign objects in the set. · Do not let insecticides, benzene, and thinner come in contact with the set. · Never disassemble or modify the set in any way. FUNCTIONS 1) EJECT: Opens the CD door 2) STOP: Stops the CD. Keep the or button pressed for a few seconds to change the scan speed. 12) LOOP: Press once to set starting loop point, press again set ending point and enter loop. 13) LCD DISPLAY: Shows time (minutes, seconds, frame), and pitch information. 15) AUDIO OUT: This stereo line output connects to the line input on any DJ mixer. 16) DIGITAL OUTPUT: This coaxial (S/P DIF) digital output connects to any RCA S/P DIF input, as found on most standard computer sound cards or CD burners. 5) PLAY/PAUSE: Plays or pauses the CD. Autocue function sets the cue point automatically when this button is used. 6) CUE: Used to recall and preview the cue point. 7) TIME: LCD display reads the time remaining or time 17) FADER START: Connects to any DJ mixer equipped with a fader start input. the CD from the cue point, using the mixer's cross or 8) PITCH: Turns pitch fader ON and OFF. 9) PITCH SELECT: Pressing the PITCH and PITCH 18) VOLTAGE SELECTOR: Used to select the unit's voltBEND - (minus) buttons simultaneously changes the age according to the local setting. [. . . ] T initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized o Stanton dealers return policy. Stanton assumes no risk and shall be subject to no liability for damage or loss resulting from the specific use or application made of the merchandise. Stantons liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the merchandise shall not exceed the price received by Stanton from our purchase of such merchandise. [. . . ]