User manual STANTON S-450

[. . . ] PROFESSIONAL CD PLAYER TIME PITCH RANGE RATIO BPM IN BANK PGM 1 4 1 2 3 4 1 1 2 1 4 1 TAP OUT FX SEL. SCRATCH FILTER HOLD PHASE ECHO FLANGER TRANS REVERSE PAN SKID CUE TIME USERS MANUAL Important To Safety WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] The TIME PARAMETER button is used to adjust the FILTER/PHASE effect's scan time in mini-second. The RATIO PARAMETER button is used adjust the FILTER/PHASE effect's frequency sweeping range. HOLD BUTTON This button allows you to set and lock any new parameters you set to the FX. If the hold function is not selected any changes to the effect parameters will be momentary. ECHO/FLANGER BUTTON This button is used to activate and deactivate the ECHO effect, when the FX SEL. This button is used to activate and deactivate the FLANGER effect, when the FX SEL. The TIME PARAMETER button is used to adjust the ECHO/FLANGER effect's scan time in mini-second. The RATIO PARAMETER button is used adjust the ECHO/FLANGER effect's frequency sweeping range. TRANS/PAN BUTTON This button is used to activate and deactivate the TRANS effect, when the FX SEL. This button is used to activate and deactivate the PAN effect, when the FX SEL. The TIME PARAMETER button is used to adjust the TRANS/PAN effect's scan time in minisecond. The RATIO PARAMETER button is used to adjust the TRANS/PAN effect's frequency sweeping range. This function will play your track or sampler in reverse. AUDIO OUT DIGITAL OUT RELAY POWER ON OFF AC IN~ 35 35 36 37 38 39 35. AUDIO OUT-SOCKETS This analogue signal requires RCA (left & right) connections. DIGITAL OUT-SOCKET This digital signal requires one SP/DIF (75 Ohm) connection. RELAY SOCKET Via the RELAY SOCKET, two CD players can be linked (connected) for relay play. If you connect to a mixer which supports fader start, you can also relay play via mixer's cross-fader. AC CONNECTION Plug in the power supply cable here. LCD Display 14 15 14 13 12 11 6. When this is not lit the CD will play continuously through all tracks. LOOP Shows when the CD is in LOOP mode; repeating a particular area of music on the CD. RELOOP Shows when the CD has had a loop set previously and that the loop is ready to be played again. ELAPSED, TOTAL REMAIN Indicates the time shown on the display is either ELAPSED, TOTAL 12. [. . . ] This function will react differently to different playback modes: Reverse track/disc play. In this mode the unit will playback in reverse until the reverse function is turned off. If the reverse function is not turned off the unit will continue to play the remainder of the disc in reverse mode until it reach the begging of the disc. When the reverse play reaches the beginning of the disc it will unreverse playback around the last two seconds from the playing of the first track. [. . . ]