User manual STANTON STR820

[. . . ] FULL MANUAL BELT DRIVE TURNTABLE STR8-20 WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NAME OF PARTS 1) 2) 3) 4) 5) 6) 7) Strobe Dots Slip Mat Center Spindle Power Switch Start/Stop Button 33 Button 45 Button 8) 9) 10) 11) 12) 13) Headshell Pitch Control Slider Tonearm Arm Rest Counterweight Position For Preparing Cartridge BEFORE USE *Check following parts included in the package with the main unit: 1) Turntable platter 2) Slip mat 3) 45-rpm adaptor 4) Counterweight 5) Headshell 6) Operating instructions 7) RCA Cables with ground wire 8) Cartridge *Notes: 1) Do not connect the AC power plug before assembly has been completed. [. . . ] If you use a non-Stanton cartridge, please follow that manufacturer's instructions. Install the dust cover to the main unit. PLACEMENT · Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance. · Do not place the unit in a location where there is high humidity or a lot of dust. · Cartridge may pick up slight sound pressures or vibrations from the speakers coming along the floor or through the air resulting in feedback. · The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally. CONNECTIONS 1. Connect the power cord to the auxiliary power outlet on the rear panel of your amplifier or receiver or to a household AC outlet. Connect the unit output terminals to the PHONO jack of your amplifier or receiver. [. . . ] 3. 5Kgs For improvement purposes, specifications and design may be changed without notice. 502-STR820-1304 [. . . ]