User manual STANTON T.120C

[. . . ] Heat ­ The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Power Sources ­ This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer the operating instructions. [. . . ] Y This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Y Unauthorized modification of this unit may cause it to no longer comply with FCC regulations and void your authority to use this device. Y Cet appareil numérique de la classe B respecte toutes les exigencies du Rèsur le materiel brouilleur du Canada. ASSEMBLY Remove all the parts from the box. Please check to make sure the following items are included with the main unit in the carton: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Platter Slip mat Counterweight 45-rpm adapter Headshell AC cord RCA cable Target light Operating instructions Cloth dust cover CONNECTIONS 1) Connect the power cord to an AC outlet. You can also use a line input by setting the phono/line switch at the rear of the turntable to Line. TONE ARM AND CARTRIDGE SETTINGS The major cause of problems in sound and skipping on the vinyl is the lack of proper set up of the needle and turntable adjustments. The T. 120C has several adjustments to correctly position the needle to the vinyl. Installation of cartridge: When installing a cartridge, refer to the operating instructions of that cartridge. During installation, attach the stylus protector to guard the stylus tip from damage. White (L+) Left channel+ Blue (L-) Left channelRed (R+) Right channel+ Green (R-) Right channelYour cartridge is to be mounted into the headshell as pre the mounting instructions included with the cartridge. The Stanton 500, 680 and 890 series of cartridges require the use of the two screws mounting into the headshell. For your convenience, some of these products can be purchased already mounted and pre-adjusted from your local Stanton dealer. If you are using these 1/2" mounted products with a headshell in a mobile application or you are doing heavy scratching, May want to use an extra shell weight. The Master series of products (Trackmaster, Groovemaster, etc. ) are designed with their own mounting that eliminates the need for a separate headshell and the wiring to the cartridge. The body of the cartridge should be parallel with the centerline of the headshell-tone arm, when viewed from the front to the back. The second adjustment is at the installation of the cartridge-head-shell assembly into the tone arm tube lock. Holding the tone arm tube in one hand, insert the cartridge-headshell into the tube lock with the other hand. Turn the lock ring clockwise (when viewed from the rear) until the headshell is locked tightly into the tone arm. Remove the needle protector from the cartridge and place the needle on record. View the needle from the front and insure that the needle is perpendicular to the record surface. If some adjustment is needed, simply loosen the lock ring and rotate the cartridge-headshell until the needle is perpendicular to the record surface. Then re-tighten the lock ring. TONE ARM AND CARTRIDGE SETTINGS The third adjustment is the needle (or stylus) pressure. Start with the cartridge-headshell assembly mounted into the tone arm. [. . . ] Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise. Stanton's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of merchantability or fitness for a particular purpose. [. . . ]