User manual SUPPORTPLUS SP-URC-81-L

[. . . ] Press the [SET] key and hold it, then press the device key that you want to control, such as [TV1], [VCR1], etc. If the entered Device Code is correct, the LED will be off automatically. If it is 1 2008-06-08 USER MANUAL FOR SP-URC-81-L incorrect, the LED will blink twice and keep being at setup mode (being on). [. . . ] under Philips TV), repeat A~E till you find the main keys work good enough. Remark: In the process of setup, if you want to quit from set up mode, please press the device key. If no key is pressed in 10 seconds, the remote control will leave the setup mode automatically. Set up By Manual Search If you have tried all the codes under the brand name, the remote control still does not work (i. e. the device still can not be controlled by this remote control), or you can not find the correct brand in the Device Code List, you can use Manual Search to find out the correct code. Press and hold [SET] key and press the device key (TV1 etc) at the same time. Press the [POWER] key again, then release it. The remote control enters into Manual Search Mode and the LED keeps flashing. Point the remote control to the device, and then press the [POWER] key. Test other keys, if they do not work good enough, return to step A. Remarks: A. In search process, you can press [SET] key to switch between Forward and Backward to change search direction and find the right code quickly. If you try to set this function at difference devices, the system would reserve the last setup only. You can make the operation of unlock under any device. Volume and Mute Lock/Unlock This function makes you very convenient when you only use one device to adjust volume. For example, you may use your amplifier as your main volume control, then you can use this function to fix the volume and mute key of AUX (amplifier inside AUX), no matter which device you will use (even you will use TV, VCR etc, the volume and mute key of remote control still control the volume and mute of your amplifier). Strike the device key that the volume and mute key you want to fix such as [TV1], [SAT], [AUX], etc. Press and hold the [SET] key, then press the [5] key, then release the both pressed keys, the LED will blink once then off, the volume and mute key of the current device are locked. 3 2008-06-08 USER MANUAL FOR SP-URC-81-L C. If you want unlock the current volume and mute key, press and hold the [SET] key, Then press the [6] key, then release the pressed keys, the LED will blink once and then off, the current volume key and mute key are unlocked. Reset This will erase all the set-up data you programmed. CThen release the both pressed keys, the LED will blink twice then off, your remote control reset. Punch-through function: When you change the device from one to another, if another device doesn't have volume key and mute key, the remote control will remain the volume key and mute key of last device. Device code display: The device code is a 3-digit number and any one of the digits can be indicated: A. Press and ho ld the [SET] key, in the mean time press the digit that you want to display, such as 1, 2, or3. [. . . ] Count the times that the LED blinks, and the blinking time is the digit. For example: SET+1 (first digit): LED blinks 1 time SET+2 (second digit): LED blinks 3 times SET+3 (third digit): LED blinks 8 times The indicated code is: 138 Others A. After you have finished set- up, first please press the device key (TV or VCR. . . ) on remote control that you want to use, then operate your remote control normally. B. [. . . ]