User manual T-FAL B-80 BEERTENDER

[. . . ] 13. SAVE THESE INSTRUCTIONS 4 B80 one way T-FAL US modif heineken . qxd:B80 one way SEB Uklta. qxd 25/06/08 15:10 Page 5 CAUTION This appliance is for household use only. Any servicing other than cleaning and user maintenance should be performed by an authorized service representative. · To reduce the risk of fire or electric shock, do not remove the base. · Check voltage to be sure that the voltage indicated on the name plate is compatible with your voltage. [. . . ] To order additional beer tubes, please contact www. beertender. com or call 1-888HEINEKEN. Before pouring a draught beer, it is very important that the Heineken® and Heineken Premium Light® DraughtKeg reach the correct temperature. Ensure DraughtKeg is sufficiently chilled before pouring a draught beer. It is ideal to purchase the DraughtKeg pre-chilled or pre-chill over night before intended use. If the DraughtKeg needs additional chilling, there are 2 recommended options: a. Inside the BeerTender ­ Depending on the temperature of the DraughtKeg, it will take up to 18 hours to chill to the ideal serving temperature. In a refrigerator ­ Depending on the temperature of your refrigerator, it will take up to 12 hours to chill to the ideal serving temperature. Tip: We recommend that you always keep an extra DraughtKeg in your refrigerator to always have a chilled keg available. Preparing the BeerTender IMPORTANT: It is important that the BeerTender power switch is turned on before inserting the DraughtKeg. 9 ENGLISH B80 one way T-FAL US modif heineken . qxd:B80 one way SEB Uklta. qxd 25/06/08 15:10 Page 10 * * * * * * * * * After setting up the BeerTender® and before use, it is vital to clean the detachable pour spout ­ this is the only part of the appliance that will come into contact with the beer. Before inserting the DraughtKegTM into the BeerTender, simply snap the patented disposable draught beer tube (5 tubes included) onto the DraughtKeg. Open the BeerTender cover by pressing in the release panel on the top of the machine. Make sure the drip tray is properly fitted and positioned. ENGLISH 10 B80 one way T-FAL US modif heineken . qxd:B80 one way SEB Uklta. qxd 25/06/08 15:10 Page 11 WARNING!The drip tray must be positioned on a level surface and must not jut out from the surface it is resting on. Control Panel Your appliance features a display providing you with important and useful information. Two LEDs on the top of the lid provide important indications: Green (ON/OFF) LED on the left of the panel: when lit, it indicates that the appliance is operating. Green beer-temperature LED on the right side of the panel: when the DraughtKegTM has reached the ideal temperature the LED switches on and the appliance goes into "stand-by" cooling mode. ENGLISH Warning: never use your BeerTender® with ambient temperature above 86°F. Pouring a beer from the BeerTender * Before pouring a beer, rinse a clean glass in cold water which chills the glass and wets the inside to enable a perfectly smooth draught pour. Use of 8 oz glasses is recommended to maintain the ideal serving temperature. Draught and Drink * Be aware that the first glass you pour from every new DraughtKeg will contain mostly foam. * Tilt and pour: Tilt your glass at a 45 degree angle as you pour and adjust upright as the glass fills. * For the optimal draught beer drinking experience, serve your beer with a foam head of 2 fingers in height (approximately 1. 5"). 11 B80 one way T-FAL US modif heineken . qxd:B80 one way SEB Uklta. qxd 25/06/08 15:10 Page 12 Proper Care and Cleaning of your BeerTender® * The drip tray and grate should be emptied and cleaned after each use. * Before cleaning the appliance, it is essential to turn off the ON/OFF switch and then pull the plug out of the socket. [. . . ] 4) Be sure to include your name, address and home telephone number with your shipment. We suggest that you carefully wrap your package for shipping and send by insured and/or by traceable means. 17 B80 one way T-FAL US modif heineken . qxd:B80 one way SEB Uklta. qxd 25/06/08 15:10 Page 18 ONE YEAR LIMITED WARRANTY ENGLISH What happens to my return?If the inspection shows that the product is defective, under our Limited Warranty, the return facility will notify T-fal to replace the defective part or product at no cost to you. Comparable substitutions are based on replacement product availability and at the sole discretion of the Manufacturer. [. . . ]