User manual TANDBERG 2U AUTOLOADER QUICK START GUIDE

[. . . ] Using scissors, a utility knife, or other appropriate tool, carefully cut the packing tape along the length and ends of the carton. Remove the accessories box from the shipping carton and check the contents. [. . . ] Attach a SCSI cable from the SCSI bus to one of the SCSI connectors on the back panel of the Autoloader. If the Autoloader is the last device on the SCSI bus (or the only device), attach a SCSI terminator to the other SCSI connector on the back panel of the Autoloader. If the Autoloader is not the last device of the SCSI bus, attach a SCSI cable from the open connector on the back panel of the Autoloader to the next device on the bus. Connect a power cord from the back panel of the Autoloader to a grounded power source. Step 5: Prepare the Host If necessary, install a SCSI host bus adapter, software, and a compatible driver on the host computer. 1. 0, June 2004 Step 6: Turn on the Autoloader Turn on the Autoloader by pressing the power button on the front panel. Power on the host and all attached SCSI devices. Use the eraser end of a pencil or something similar to press the left side of the power switch. Step 6: Operating the Autoloader The following sections provide an overview of Autoloader operations. Load tapes into the Autoloader by using the Import command from the front panel and then inserting the data cartridge into the mailslot. Install data cartridges in slots 1-8: 1. Unload tape cartridges from the Autoloader by using the Export command from the front panel. Load tape cartridges from the Autoloader slots into the tape drive by using the Load Cartridge command from the front panel. Unload tape cartridges from the tape drive to the Autoloader slots by using the Unload Cartridge command from the front panel. Use the Clean Drive command from the front panel to import a cleaning cartridge into the Autoloader and begin the cleaning operation. [. . . ] (main office for ASIA) 20 Bendemeer Road #04-05 Cyberhub Singapore 339914 Phone: Fax: 0065 ­ (0)6396 ­ 0786 0065 ­ (0)6396 ­ 0787 Japan TANDBERG Data Inc. , 7th floor 22-4, Shinkawa 1-chome Chuo-ku Tokyo 104 Japan Phone: Fax: 0081 ­ (0)3 5566 ­ 2871 0081 ­ (0)3 5566 ­ 2875 7 Rev. [. . . ]