User manual TANDBERG STORAGELIBRARY REV0 QUICK INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TANDBERG STORAGELIBRARY REV0. We hope that this TANDBERG STORAGELIBRARY REV0 user guide will be useful to you.


TANDBERG STORAGELIBRARY REV0 QUICK INSTALLATION GUIDE: Download the complete user guide (182 Ko)

Manual abstract: user guide TANDBERG STORAGELIBRARY REV0QUICK INSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Quick Installation Steps For more information and complete step-by-step instructions, see Tandberg StorageLibraryTM T40 Installation and User Guide. Caution The Tandberg StorageLibraryTM T40 could be lifted by one person if drives, power supply, and magazines are removed. [. . . ] 2 If your library includes SCSI tape drives connect the SCSI cables to the connectors on the drive sled. See the Installation and User Guide for installation requirements when using more than 2 SCSI drives. Connect a jumper cable between the top SCSI connector of the bottom drive and the bottom SCSI connector of the drive above it. Terminate the last device on the SCSI bus with the appropriate SCSI terminator. In a typical installation, the cable length should not exceed 9 meters / 30 feet. 2 3 If your library includes fibre channel tape drives connect the fibre cables to the tape drives: a. Attach the other end of the cable to the host, switch or hub. Connect your Ethernet cable to the Ethernet port on the rear of the library. 5 Connect a power cord to the power connector on the rear of the library. 7 If the library is a tabletop version, the library detects that the locking screws are present. Follow the instructions on the front panel display to remove the magazines to get access to the screws. 9 Verify that each host can communicate with the library's tape drives. 10 Configure your library using the library's operator panel. 4 3 Table: Power Requirements Power Requirements Input Voltage Input Frequency Inrush Current (Cold Start) Power Consumption Average Power Consumption Peak* Values 100 ­ 240 VAC 50 ­- 60 Hz Less than 15 A, 115 VAC Less than 30 A, 230 VAC 70 W 120 W* * Maximum peak length, less than 10ms. 4 International Headquarter Tandberg Data ASA, Kjelsåsveien 161 P. O. Box 134 Kjelsås, N-0411 Oslo, Norway Tel: +47 22 18 90 90, Fax: +47 22 18 95 50 www. tandberg. com Worldwide subsidiaries Tandberg Data Corp. , 12860 Danielson Court, Poway, U. S. A. [. . . ] 8th floor 29-13, Shinkawa 1chome, Chuo-ku Tokyo 104-033, Japan Tel: +81 3 5566 2871. Fax: +81 3 5566 2875 Tandberg Data Ltd. , Bloxham Mill Business Centre, Barford Road, Bloxham, Banbury, Oxfordshire, OX15 4FF, United Kingdom Tel: +44 (0) 8450706916. Specifications subject to change without notice. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TANDBERG STORAGELIBRARY REV0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TANDBERG STORAGELIBRARY REV0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.