User manual THOMSON 14MS15UT
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual THOMSON 14MS15UT. We hope that this THOMSON 14MS15UT user guide will be useful to you.
Manual abstract: user guide THOMSON 14MS15UT
Detailed instructions for use are in the User's Guide.
[. . . ] Never risk damage to the remote control by extreme heat - do not leave close to a radiator or on a window ledge in direct sunshine.
Connections
2
1. Aerial Socket
Enables connection of the aerial and, if required, a video recorder (see manual for latter). To tune the channel reserved for your video recorder, start up the recorder then carry out MANUAL CHANNEL SETTING operations. Store at any programme ending with a 9 (9, 19, 29, etc. ) Each time you use the video recorder, switch to the channel assigned to it.
2. [. . . ] If this is not the case, you can call it up by: pressing the times. button on the remote control three
AUTO INSTALL.
UK
A new menu appears. The cursor moves from left to right on the VL line, then on the VH line and then on the U line. The channels found are stored in memory in order starting from programme PR 01.
AUTO INSTALL.
UK VL
You can stop the automatic search at any time by pressing PR01 the button. The search stops automatically at the end of the U band or when 99 channels have been found. The channel stored on programme PR 01 is selected (see next page).
Changing a Programme Number
Select the channel number to be changed using the button.
AUTO INSTALL.
Using the numerical keypad on the remote control, enter the new programme number. You can also use the Press the buttons on the remote control.
UK VL PR01
button to confirm the change.
The programmes stored under the old and new numbers are then swapped. Repeat this operation to change other programme numbers.
Erasing a Programme
Select the programme to be erased using the button.
Enter 0 or 00 on the numerical keypad of the remote control. button, then press
Check that all the programmes are in the required order using the to leave the menu.
6
Manual Channel Setting
Press the button twice to call up the channel setting menu. Channel Search
Select the 2nd line of the menu using the Start the search by pressing: the the button for a forward search, button for a backward search.
UK VL
button.
The search fully covers the VL, VH and U bands starting PR from the channel on the screen. The cursor moves and as soon as a channel is found, the picture appears on the screen. Wait for the menu to go to the bottom of the screen for optimum reception. If the picture corresponds to the channel required, go to the 4th line (PR), otherwise continue the search.
If you wish to stop the automatic search, press the button.
2. Programme Number and Storing in Memory
Select the 4th line of the menu using the button.
UK VL PR
If fine tuning is necessary, see Fine Tuning Enter a programme number using the numerical buttons of the remote control. You can also use the
buttons.
Store the programme number you have allocated to the channel by pressing the The 2nd line of the menu is then selected again.
button.
Restart the search using the
buttons.
3. Fine Tuning
Only necessary in the event of interference
If fine tuning is necessary, select the 3rd line of the menu using the button. buttons.
PR UK VL
If necessary, adjust the picture using the Select the 4th line (PR) using the
button to allocate a programme number to the channel
and store it in memory (see Programme Number and Storing in Memory)
If a channel has required fine tuning, it will be stored in memory with the AFC (Automatic Frequency Control) deactivated.
Press the button to leave the menu.
8
Picture Adjustments
Press the button to call up the Picture Menu.
BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
TINT
Select the function to be adjusted using the The tint function is only active in NTSC mode. Adjust as required using the buttons.
buttons.
Storing Personal Adjustments
You can store the adjustments you have just made and call them up at a later stage. Caution: these personal adjustments will replace and delete the standard settings made at the factory. With the Picture Menu displayed, press the red Press the button to leave the menu. Set the standby time in 10minute steps (up to 4 hours) using the the Press the buttons button to leave the menu
button to call up the Standby
The television set is child locked when the programmed time period has elapsed. To cancel the sleep time function: press the green press the button to call up the menu.
button once or several times to return to: :
When the display indicates :, the sleep timer function is deactivated. [. . . ] Press again to return to teletext only.
Fastext Functions
If the teletext is Fastext, a submenu appears. Special arrangements may need to be made for Don't obstruct the ventilation of the equipment, for infirm or handicapped people. Don't listen to headphones at high volume, as such use can permanently damage your hearing.
PERITELEVISON (SCART) PIN CONNECTIONS
VIDEO INPUTS
Composite video or sync: RGB: Red Green Blue Pin 15 (pin 13 return). Pin 20 (pin 17 return).
SIGNAL SELECTION
Facilities are provided for automatic switching when the equipment connected provides switching voltages as follows: Pin 8: + 9. 5 V to + 12 V Auto switching to auxiliary O/AUX channel. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE THOMSON 14MS15UT
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual THOMSON 14MS15UT will begin.