User manual THOMSON 27LB120S4

[. . . ] IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cle aning the product. [. . . ] Display the channel number to be deleted using the PR+/PR- buttons or the 0-9 keys. Select the Delete programme option and press the OK button to delete the channel. Once this channel has been deleted the bottom help line will show " The programme has been deleted" message. Note : you can use AUTOMATIC UPDATE menu (from Installation menu) to restore the deleted programme Naming or renaming channels The Select programme line is selected. Display the number of the channel whose name you want to change using the PR+/PR- buttons. name option and press the button to place the cursor on the first character. Using the / buttons, select a character from the list, which includes letters from the alphabet, numbers between 0 and 9, the characters +, . Go on to the next character or back to the previous character using the / buttons and start the procedure again. Note : You may subsequently return to ORGANISER menu by selecting the Organiser line in the INSTALLATIO N menu. 12 Manual channel set-up Follow the procedure given on this page if you find that some channels have not been stored during the initial setup. Setting up channels manually requires every setting for a particular channel to be entered, one at a time. Display the OVERVIEW menu by pressing the MANUAL INSTALLATION MENU button. Return Standard Frequency Programme name Fine-tuning Store on programme Decoder Teletext char. Select the Manual Installation option from the INSTALLATIO N menu and press OK to confirm. 1. Select the Standard option and then the relevant standard for your country using the / buttons. Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg, DK for Eastern Europe , the Middle East and Asia, EURO for Western Europe, Australia and New Zealand. Use the or button to start the search in descending or ascending order. Note : If the channel name is found, it is displayed next to Programme name option. You do this by selecting the Fine tuning option and adjusting it with the / buttons. If the channel is encrypted and you want to connect a decoder, select the Decoder option and check the box by pressing the OK button. set option and choose the character set that will be used for Teletext on this channel using the / buttons. The following character sets are available: 1 : Western Europe 2 : Eastern Europe 3 : Turkish and Greek 4 : Russian and Bulgarian 5 : Arabic 6 : Farsi The character set selected determines how characters are displayed on Teletext screens. 6. Select the Store on programme option to assign a number to the channel. [. . . ] To display images from the connected computer, select PC using AV button on the remote control Method B : (Depending on model) Connect the DVI signal terminal on the back side of the LCD TV to the output of PC equipment through min DVI cable. Connect the stereo sound input jack (Audio input near DVI connector) on the back of the LCD TV to the audio output terminal on the computer. To display images from the connected computer, select DVI using AV button on the remote control Note: The display native resolution is 1280 x 720. If the signal resolution exceeds the native resolution, it may not be possible to show fine detail with sufficient clarity. [. . . ]