User manual THOMSON 30LB020S4

[. . . ] Contents Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sockets on the rear of the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting to the mains power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Main menu appears on the left-hand side of the screen when you press MENU button. see page 15 16 13 17 16 13 19 20 21 Item 1 2 3 Meaning Main menu Submenu Status bar Press ÿ to advance to the selected submenu (Main menu item is highlighted blue). To return to the Main menu from the various submenus, select < Return using the arrow keys Y / /. Press the arrow key to access the Main menu (Main menu item is highlighted green). 12 seconds providing no buttons are pressed on the remote control. 12 Operation Operation Switching on/off Actuate power switch (3) to activate standby mode. Press the button on the remote control to turn the active unit to standby mode. The standby indicator lights up (1) red. Channel selection The channels are selected directly by pressing the numeric keys (0-9). To select channels with two-digit numbers, press the corresponding numeric keys (0-9) in direct succession. · Pressing arrow buttons Y / / selects the channels one by one. · Sleep mode If Program is no longer received on a certain channel, e. g. after the station signs off or if there is no antenna signal, the unit automatically switches to standby mode after approx. Use an appropriate power supply and avoid using multiple socket outlets!To avoid damage caused by thunderstorms, pull out the mains and antenna sockets during the storm. Do not touch power supply plugs with wet hands - risk of electric shocks! En Note: In AV mode (operation of an external device using one of the Scart connection sockets on the rear of the unit), sleep mode is disabled. Setting channels Unit configuration 1. When channels are stored automatically, they are sorted according to the usual order they are stored in the respective countries. Various functions can be assigned to buttons F1-F2-F3-F4 (see also page 19). The number given in the Nb of Pr. line limits the amount of channels when "zapping". Higher channel numbers will therefore be ignored when channels are selected one by one (zapping). These channels can only be selected using the numeric keys (0-9) on the remote control and in the channel list. Use arrow buttons / ÿ to modify the relevant settings or data. 4. All stations received are automatically stored in the channel positions in ascending numerical order. If the video recorder channel position is also to be programmed automatically, then connect the video recorder correctly with the antenna (HF) and play a pre-recorded cassette. [. . . ] AV signals (picture and sound) can be recorded and reproduced via this socket. Scart socket D (23LB020S4, 30LB020S4) or F (15LB020S4, 20LB020S4) are only used to reproduce the AV signal. En The television is fitted with up to three Scart sockets (see Specifications on page 3). An additional Scart connection Ç provides optimum picture and sound quality. The required cable is available at your specialist dealer. 25 Auxiliary equipment RGB signal The RGB signal (red-green-blue colour signal), e. g. [. . . ]