User manual THOMSON BOT63PXD

[. . . ] Of course, in an ongoing effort to better satisfy your demands with regard to our products, our after-sales service department is at your disposal and ready to listen in order to respond to all of your questions and suggestions (contact information at the end of this booklet). You can also log onto our site:where you will find our latest new ideas and useful additional information. [. . . ] 4 The display shows the time once again when the function selector switch is returned to 0 (fig. - Cooking with delayed start and chosen cooking end time Proceed as with programmed cooking. - After setting the cooking time , press the " " button until the end of cooking indicator flashes " ". The display flashes to indicate that you can now adjust the setting (fig. After these 3 steps, the oven heating is delayed so that cooking ends at 13:00. 2 At the end of cooking (end of programmed time), - the oven turns off, - the cooking time indicator and 0:00 both flash (fig. 3 The display shows the time once again when the function selector switch is returned to 0 (fig. The light inside the oven turns on when cooking starts and goes out when cooking stops. - Your oven's programmer can be used as an independent timer that allows you to count down a time without operating the oven. - Press the button " " to confirm, or wait for a few seconds. 2 The display stops flashing after a few seconds and the timer starts working, counting down the time in seconds. Rapid temperature increase: Some dishes can be placed in the oven while it is still cold. [. . . ] When pyrolysis finishes, 0:00 starts flashing as well as the symbol (fig. The oven is clean and once again ready for the cooking cycle of your choice. [. . . ]