User manual THOMSON CT254L

[. . . ] € The adapter should not be obstructed or should be readily accessible during use. € If you need to use an extension cord, take all necessary precautions to ensure that no-one can trip over it or get tangled up in it. € To avoid all risk of fire or electrical shock, do not expose the appliance to rain or humidity. Therefore, the appliance should not be used near a water supply point or in a humid location. [. . . ] Disposing of batteries at the end of their life In order to respect the environment, do not throw used batteries out with household waste. Dispose of them at your nearest recycling centre or at a used battery collection point. BATTERY BACK-UP The back-up system ensures that the clock continues to function in the event of a power-cut. Used under license by: Parsons International France 19 Boulevard Albert Einstein 77420 Champs sur Marne - France MAINTENANCE AND CLEANING Consult the following table if there is a problem with the appliance. MAINTENANCE AND CLEANING • Unplug the appliance before cleaning it. Do not use abrasive products or solvents that may damage the appliance’s surface. ATTENTION: Never immerse the appliance in water or in any liquid whatsoever. € If it is not used for a long time, unplug the appliance and remove the batteries. N°Azur (+33)0825 745 770 call rate according to operator The hour French time: Monday to Thursday (from 9 am to 18 pm) and Friday (9 am to 3:30 p. 3A Output : 5V 1200mA Note: Unit design and specifications are subject to change without notice. The manufacturer reserves the right to make the necessary improvements. EN V-N : 210113-1 EN CLOCK RADIO CT390 3 13 3 USE INSTALLATION • Plug the mains adaptor into the socket. € Insert the mains adaptor plug in the power connector at the back of the device. If you wish to use another adaptor, ensure that it has the same specifications and complies with current standards. SETTING THE TIME AND DATE Automatic configuration: After connecting the device, the radio is off; press SYNC TIME to automatically configure the clock using RDS frequencies. If this is not possible due to poor frequency reception, you can configure the clock manually. Manual configuration: • Press SET: the hours display flashes the (clock set). ON OFF DEACTIVATING THE ALARM • To deactivate alarm 1 or alarm 2, press repeatedly until the alarm lights turn off. Or 20 1 7 6 21 ALARM REPEAT (SNOOZE) • Touch or pass your hand over the SNOOZE SENSOR proximity sensor to stop the alarm. USING THE RADIO The reception of RDS signals depends on the physical location of the device. [. . . ] € Press SYNC TEMP at the back of the device to start synchronisation. ADJUSTING THE BRIGHTNESS OF THE DISPLAY • Press DIMMER to adjust the backlight intensity of the two LCD screens. USB CHARGER SOCKET • Allows you to charge your Smartphone or MP3 player battery. AUXILIARY IN Allows you to play music from an external audio source on the radio speakers. [. . . ]