User manual THOMSON DSR100T

[. . . ] DSR 100 T GB 1/09/2000 16:29 Page 1 Safety Precautions Before using this device, please read the following carefully. · No objects filled with liquids, such as vases, shall be placed on the apparatus. · Power Requirements: AC 100 - 240V ~, 50/60Hz · Disassemble!: Do not attempt to disassemble the product since opening the cabinet may cause a malfunction or electric shock. · Overloading: Do not place anything heavy on the ventilation openings, connection cord and power adapter to prevent electric shocks and fire hazards. [. . . ] Press the " " characters using character to delete characters. Press EXIT key to save the changed name and then it will return to the previous menu. - Delete: When a channel selected to be deleted, the color of "NO" column will be changed to be yellow. When you select any one sort, the channels will be sorted accordingly. · Favorite: It will place the favorite channels at the top of the list. · Lock: It will place the locked channels to the last at the list. · Scramble: It will place scrambled channels to the last of the list. · Sat Name: It will rearranged the channels by satellite names in alphabetical order from A to Z. Name: It will rearranged the channels by name in alphabetical order from A to Z. 18 ENGLISH DSR 100 T GB 1/09/2000 16:29 Page 19 4. After finishing channel editing, press EXIT key then the dialog box will come up. Select "Yes" or "No", if your select "No" it will come back to the condition before editing and if you select "Yes", changed attributions will be saved. When you select any one sort, the channels will be sorted accordingly. Timer The "Timer" function allows you to program when the receiver switches on and off. To activate the "Turn On Time" and/or the "Turn Off Time", press the OK key on the "Timer" in the main menu. You can enter the required time by pressing numeric key. ENGLISH Turn ON Turn On Time Turn OFF Turn Off Time NO 00 : 00 NO 00 : 00 Timer 19 DSR 100 T GB 1/09/2000 16:29 Page 20 4. Antenna Setup You can assign satellites, LNBs and switches to 16 antennas in this "Antenna Setup" menu. ENGLISH Antenna Satellite Univ. 2 0/12 Volt 14/18 Volt 22KHz tone DiSEqC 1 ASTRA YES 9750 10600 None None None Antenna Setup Port A Signal Level Go to Auto Search Positioning Help 1. · Satellite: Select any one satellite among 31 satellites preprogrammed. · 14/18V switch: Select any one out of "NONE", "14V" or "18V". · 22KHZ switch : Select any one out of "NONE", "0KHz" or "22KHz" · DiSEqC switch: Select any one out of "NONE", "Port A", "Port B", "Port C" or "Port D". 20 DSR 100 T GB 1/09/2000 16:29 Page 21 · For reference · In the case of using switch, please keep in mind the combination of antenna and each switch ports. · In the case of selecting 14/18V switch, all of the polarization of transponders in a satellite will be fixed as Vertical (14V) and Horizontal (18V). · It is not allowed to use 22KHZ tone switch and DiSEqC switch at the same time because the attributes of both switches are utilizing the same 22KHZ tone. [. . . ] Connect slave DSR (should be in stand-by mode) with master DSR using RS-232 cable when "Please connect both receivers using RS-232 communication cable, Select OK to continue" message is on the screen and select OK. ENGLISH Please Connect Both Receivers Using RS-232 Communication Cable Select OK to Continue OK CANCEL 4. In the menu of "Data Transfer", please place " " mark on the item as needed. If you want to transfer both "User Data" and "Software", please check both of them at one time. · User Data Transfer: This will upgrade the Satellite, Transponder and Channel data. [. . . ]