User manual THOMSON DTH109E

[. . . ] The disc menu language is not the correct one. · The disc menu language has not been set up. · The language of your choice is not available on the disc. You have forgotten your password (Parental control). · Open the disc tray, press CLEAR and then enter 00001 with the numeric buttons. Turn off the player and then turn it on again. Precautions Use · If your appliance has been stored in a cool place for any length of time, during a journey for example, wait for about 2 hours before using it. · The openings located on the top and bottom are for ventilation and must not be obstructed. · During thunderstorms, we recommend that you isolate the appliance from the electrical supply so that it is not damaged by electrical or electromagnetic surges. [. . . ] SVCD - Super Video Compact Disc Most SVCDs comply with the IEC62107 standard. SVCDs can be used to record up to 70 minutes of digital sound and images in accordance with MPEG-2 standards for video and MPEG-1 standards for audio. Switch on the devices. Note: If one of the devices is not working, check that all the cables have been inserted properly into the sockets which they should be connected to. Other connection options THOMSON Multimedia Sales Europe 46, quai A. Le Gallo 92648 Boulogne Cedex FRANCE 322 019 464 RCS NANTERRE http://www. thomson-europe. com DVD+Rewritable TV AUDIO VIDEO OUT (RGB) Inserting batteries in the remote control Insert two LR06 or AA batteries in the remote control. · Do not mix different types of batteries or new and old batteries. · In order to avoid any risk of explosion, observe the polarities indicated inside the battery compartment. · If you are not using the remote control for a long period of time, remove the batteries. 35888990 © Copyright THOMSON 2005 VIDEO OUT socket This socket (yellow) is also known as a composite video socket. The video cable (not supplied) usually comes with two audio cables (white and red). The picture Video cable (yellow) VIDEO OUT socket quality obtained using a video connection is poorer compared to that obtained using a Scart connection. 1 Audio cables (red and white) AUDIO R and L sockets AUDIO L (left) and AUDIO R (right) sockets These are analogue audio output sockets. The AUDIO L socket and cable are white, while the AUDIO R socket and cable are red. Connect the DVD player's AUDIO L and R sockets to the television set's AUDIO L and R sockets using audio cables (not supplied). Note: If your television set only has one audio socket connect it to the DVD player's left socket (white). 4. Use the , , and buttons to select Start and press OK to start playback. Press the STOP button twice or the OPEN/CLOSE button to cancel the programme playback. 2. Place the disc with the printed side facing up and close the tray. The disc's contents are displayed. Select a folder using the and buttons on the remote control, then press OK to see the folder's contents. The Dolby Digital Setup menu -- Dolby Digital Setup -Dynamic FULL 3/4 1/2 1/4 OFF 4. Select a file using the Random playback (all discs except DVD) You can play all the tracks on the disc in a random order (chosen by the player). Once 20 tracks have been randomly played, the player automatically stops playback. "Off" appears on the TV screen. and buttons on the remote control, then press OK to start playback. To go back to the folder list, press the button in stop mode. Note: During playback you can use the SKIP to the next one. or SKIP button to go back to the previous file or go on Coaxial cable Coaxial digital audio output Coaxial digital audio output (COAXIAL) This socket offers a higher level of sound quality compared to that provided using an analogue audio connection. For 6-channel multichannel sound, connect the audio/video amplifier or receiver to this socket using a coaxial cable (not supplied). Playing JPEG and mp3 music files at the same time You can display JPEG files while listening to mp3 music files recorded on the same disc. Select an mp3 music file using the and buttons, then press OK to confirm your selection. Then select a JPEG image file using the and buttons, then press OK to confirm your selection. Note:To delete your selection, press the CLEAR button. Dolby and the double-D symbol license from Dolby Laboratories. are trademarks of Dolby Laboratories. Manufactured under Advanced functions Audio (DVD, VCD and audio CD) Some discs have several audio tracks used for different languages or different audio formats. To change the language or audio format during play, press the AUDIO button one or more times to select one of the available audio formats or languages. Note:This option is only available if the disc offers a number of dialogue languages or audio formats. Basic Playback Operations Regional coding Your DVD player has been designed to process regional management information that is stored on DVD discs. [. . . ] For audio CD and VCD only: enter the track number with the number buttons and then press OK. The General Setup menu General Setup Menu TV Display TV Type Menu Language Normal/PS PAL ENG Zoom (DVD, VCD and DivX only) 1. While a disc is playing, press the ZOOM button until you reach the zoom size you require. Move from one area to another using the , , and buttons. It is impossible to read the disc. · Insert the disc with the printed side facing up. · Check that the disc can actually be played by this device (see below). [. . . ]