User manual THOMSON DTH5400

[. . . ] IB5400GB 3/09/01 16:13 Page 1 Precautions 1 - Setting up Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm). Do not place the player on amplifiers or other equipment which may become hot. Switching off the DVD player to the stand-by mode does not disconnect the electricity supply. [. . . ] Press prog / random (3) on the remote control and select "Random On". Press ok (15) to confirm and start random playback. Random On Program To clear Random play Press prog / random (3) on the remote control and select "Random Off". 23), random play is not available. 19 IB5400GB 3/09/01 16:14 Page 20 Repeat and random Play Repeat play (for DVDs and Audio CDs) Press info key twice then select the repeat function and choose either Chapter, Title or Disc with the Navigation keys then press ok (15) to start playback. Repeat functions remain active until you turn them off, open the disc tray or turn off the power. Title Angle 1/3 Repeat Track 05 Chapter Time Master Vol. Audio:ENG 64 2CH Surround Subtitle On ENG Intro Info 1/2 Info 2/2 Repeat a scene between point A and point B. Press info key twice then select select the repeat function and choose A-B on screen using the Navigation keys, The letter A turn from white to yellow. Press ok (15) to memorise the begining of the scene you want to repeat. Wait few seconds before pressing again the ok (15) key to mark the end of the scene to be repeated (B point). To define the "B" point of the (A-B) section, the player must be in Normal play mode. Do not use "REV key (26) or FWD key (28)", otherwise "A-B" Repeat mode will be lost. If the title or track is completed before marking the end B, the end of title or track automatically becomes B. Repeat play only works with discs that show the elapsed time on the display. It may not work correctly with some discs (Video CD, with PBC, Menu "On" mode). Repeat CD with TV Off For CDs, follow the steps below with the TV turned off. To cancel the repeat, press clear (25). Slow Repeat Put the player in Frame advance mode by pressing successively the PLAY (27), PAUSE (30), FWD (28) keys. Press repeatedly the FWD (28) key to chose the slow motion speed (1/8, 1/4, . . . . ). Select the Repeat function then proceed as for the repetition of a scene between 2 points A and B : press ok once for the A point; press ok a second time for the B point; press ok again to start the Slow Repeat). Title Angle 1/3 Repeat Track 05 Chapter Time Audio:ENG Master Vol. 64 2CH Subtitle ENG Info 1/2 Surround On Intro Info 2/2 20 IB5400GB 3/09/01 16:14 Page 21 Programme Play Programme play (for DVDs and Audio CDs) The programme play function allows you to programme the CD tracks or DVD disc chapters you want to play. Program playback lets you set up a specific order for DVD / Audio CD / Video CD playback up to 20 chapters / tracks. Program playback is not available when you play Video CD in PBC mode when Video CD Menu is "ON" mode (see p. Press PROG / RANDOM (3) on the remote control then use the Navigation keys to select Program then press ok (15) to confirm. With the Navigation keys highlight the first chapter / track to add to the program then press ok (15). Press PLAY (27) to start the programmed play. GB PROGRAM Choose chapters by using vw OK Chap. (T: 01) Program Order vw R 01 05 09 13 02 06 10 14 03 07 11 15 04 08 12 16 X CLEAR RETURN OK PLAY To resume normal playback, press clear (25) and then press PLAY (27). About DVD discs The player will automatically determine whether to do CHAPTER programming or TITLE programming. - If there is only 1 title on the DVD disc, then it will do chapter programming. [. . . ] You should therefore make sure you can record all the tracks you intend recording in a single session. ) Do not under-record. If you make just a few recordings on your disc the DVD player will take a long time searching for and locating these few tracks. 34 IB5400GB 3/09/01 16:14 Page 35 Disc playback recommendations "Close the complete disc" at the end of recording. This means that no more recording can be added, later on, on this disc. Your home computer will only do this if you have ticked the right option in your recording program, at the end of the recording session. [. . . ]