User manual THOMSON DTI 652

[. . . ] It could be dangerous and you risk electric shock or damaging the set. Any noticed damage will invalidate the warranty conditions of your equipment. Installation: Ensure that the voltage from the mains in your room complies with that indicated on the back of your set (identification label, screen marking, etc. ). Do not connect an AC or DC power supply other than that from the mains. [. . . ] EXIT Exits the menu. p/q In the viewing mode, tunes to the next/previous channel Moves up/down through menus. OK Selects or confirms a choice Opens the current channel list (favourite list and All Channels list). GUIDE Opens the Electronic Program Guide. t VOL- / u VOL+ In the viewing mode, increases/ decreases audio volume Moves left/right through menus. P+/PIn the viewing mode, tunes to the next/previous channel. TXT Opens the teletext / Opens the teletext transparency mode / Closes the teletext (if the channel displays teletext). WHITE/LIST Opens all lists (favourite list and All Channels list). Colour buttons / FAV A --> D Context dependant function buttons in menu. Gives a direct access to each favourite list in video. i Opens the information banner. Opens the extended information banner 4 General Information 4. Chart of menus EN Channels Favourite lists Timers Installation Language Connection Menu settings Terminal Time Upgrade Factory Reset Antenna Set up language choices. TV scart output CVBS standard RGB level Overview of all installed TV & radio services. Menu language Audio Preference Channels Parental lock PIN code Erase Channels Information Install all TV & radio. Change PIN Code. Show terminal & software reference http://www. thomson-europe. com. Note : value set by default is shown under brackets (e. g. ). 5 General Information 4. 1 Channels This sub-menu gives an access to the All channels list. The `All channels' list displays on the left while you can view in a resized video picture on the right the current program of the highlighted channel. This sub-menu allows you to reorganize the All channels list and set a channel protection on some channels. Note: For a direct access the `All channels' list without reorganizing channels, press the WHITE/LIST button, select All channels and press OK. Delete Channels from the channel list (to remove unwished channels): 1. Press OK button to delete all channels selected with the red garbage bin, or press EXIT to cancel this operation. Press the (Green) button to display a green twin-arrow icon on the right of the channel name. Use the p/q buttons to move the selected channel to its new position in the list. Lock/unlock Channels from the channel list (to set/delete a PIN code to view some channels): 1. Press the (Yellow) button to display a yellow lock icon on the right of each channel to lock. Enter the decoder PIN Code to lock all channels selected with a yellow lock icon. Note 1:The procedure to unlock a channel is similar. Note 2: Prior to any PIN Code change, the PIN Code factory setting is `0000'. 3. Press the EXIT button to view the highlighted channel on full screen. 4. 2 Favourite lists 1. [. . . ] Therefore information contained in this user manual is not contractual. For a full and updated description, see http://www. thomson-broadband. com. EN This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has a implemented a specific collection and recycling system for which manufacturers' are responsible. This appliance has been designed and manufactured with high quality materials and components that can be recycled and reused. Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to work properly but which can become a health and environmental hazard if they are not handled or disposed of in the proper way. [. . . ]