User manual THOMSON THT 502

[. . . ] THT502 THT505 Digital Terrestrial HD Receiver User manual Bedienungsanleitung Manuel d’utilisation Manuale utente Manual del usuario Manual do Utilizador Instrukcja obsługi Használati útmutató Ръководство на потребителя Evolution. Passion. www. thomsonstb. net THOMSON is a trademark of TECHNICOLOR S. A. • Franz-Josefs-Kai 1 • 1010 Vienna • Austria Email: support_at@thomsonstb. net M: 09 Sep 2014 15:07 E: 09 Sep 2014 15:18 Table of Contents 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 DEFAULT PIN: 1234 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with RCA cable 3. 5 Connecting to a Digital Audio Amplifier with S    DIF /P 3. 6 Connecting to a Digital Audio Amplifier and TV using HDMI 3. 7 Connecting to an analogue Audio Amplifier 3. 8 Connecting a USB storage device 4. 0 Starting up for the first time 5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Timeshift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel 7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media 8. 0 Troubleshooting 9. 0 Technical Specifications M: 09 Sep 2014 15:03 E: 09 Sep 2014 15:15 2 2 2 2 3 3 3 3 3 4 4 5 5 5 5 5 6 6 6 6 6 7 8 8 8 8 9 9 9 9 9 10 10 12 12 15 16 16 19 20 THOMSON declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. [. . . ] Select Yes to save the changes or No to discard. 7. 1. 1. 1 Adding channels to favourite lists 7. 1. 1. 2 Locking channels Locked channels can only be watched after entering the PIN code. (DEFAULT PIN: 1234) To lock or unlock a channel, press RED while in TV Channel List. (DEFAULT PIN: 1234) Locked channels will be marked with the  symbol. Channels marked with will be skipped when zapping channels with the pq buttons. Press pq to select a channel and press OK to mark or unmark it for skipping. Select Yes to save the changes or No to discard. 7. 1. 1. 3 Skipping channels 7. 1. 1. 4 Moving channels To enable the Move function, press YELLOW while in TV Channel List. Now you can move the selected channel up or down inside the channel list by using pq. If you made changes in the previous menu, but haven’t saved them yet, you will be asked to do so now. Possible methods are: Name (A-Z):  Sorting in alphabetical order from A to Z. All Default:  Sorting by searched Order (from lowest to highest frequency or by LCN numbering). English P11 MAIN MENU 7. 1. 1. 5 Editing channels 7. 1. 2 Radio Channel List Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only difference is that in Radio Channel List there is no video information, so it will always display the radio background on the preview screen. 7. 1. 3 Delete all Use this menu to delete all stored channels. Inside the confirmation window select Yes with tu and press OK to delete or select No to cancel. WARNING!  The Delete all function will permanently delete all current channels and all favourite lists from your receiver, and you are not able to leave the menu until you search for channels again. 7. 1. 4 Rename Favourite list This menu allows you to personalize the names of the 8 available favourite lists. Use pq to select Rename Favourite List from the Edit Channel Menu and press OK to proceed. When all changes have been made, press twice to leave this menu. 7. 2 Installation 7. 2. 1 Auto Scan Use pq to select Installation and press OK or u to advance. When FTA Only is set to Yes, scrambled channels won’t be stored in the channel list. The receiver will store all found channels in the channel list. 7. 2. 2 Channel Scan Use pq to select Installation, press OK or u to advance. Use tu to toggle between available scan modes: By Channel and By Frequency. If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency is selected, use the cursor buttons to select Frequency and Bandwidth. Newly found channels will be added to the channel list. 7. 2. 3 Antenna Power Use pq to select Installation, press OK or u to advance. [. . . ] Please, enter your PIN code to access this menu and press OK to start formatting. Warning!  Formatting will permanently delete ALL data stored on the connected device. Please make a backup copy of all data you wish to keep before entering the HDD Format menu. THOMSON cannot be held responsible for loss of data from USB devices used with this receiver. [. . . ]