User manual THOMSON WFT6412XI

[. . . ] If the power cord is damaged, it must be replaced by the manufacturer, their after-sales service or similar qualified personnel, to avoid hazards. follow the washing instructions recommended by the manufacturer of the garment to be washed. Fabric softeners or similar products should be used as described in the fabric softener instructions. The appliance should not be installed behind a lockable or sliding door or a door with the hinges on the opposite side to where the tumble dryer is located. [. . . ] If you wish to use the drying programme, first check that the fabric is suitable for machinedrying. We recommend you load your washing machine to the maximum level, to economise on water and power. We advise washing items of different sizes together whenever possible, as this optimises the washing process and favours the distribution of the load inside the drum on spin-drying, reducing noise. A The detergent drawer of your washing machine is divided into 3 compartments. The compartments are marked with a MAX line to show the maximum level to which they can be filled. Remember that the amount of detergent to be used depends on: The amount of clothes to be washed. The hardness of the water (to find out the water hardness in your area, contact the relevant local authorities). We recommend you use an anti-scale product if you live in a hard water area. Using more detergent will not give you better wash results, and as well as costing you money it will also have a negative effect on the environment. To select a wash programme, proceed as follows: a Starting from the "Stop" position, the washing machine will switch on when you select the desired wash programme (see programme chart). Press this button several times to progressively increase the drying time. If you select a wash+dry function, make sure you do not exceed a load of 4 Kg (or 1. Cotton 1 2 3 4 5 Cotton-prewash 60ºC Cotton 90ºC Cotton 60ºC Cotton 40ºC Cotton 30ºC Synthetic 7 Synthetic 60ºC 8 Synthetic 40ºC Delicate 10 Delicate 40ºC 11 Delicate 30ºC Wool 12 Wool 30ºC 13 Wool cold Drying 6 Normal dry 9 Delicate dry Additional 14 Quick 30' 15 Spin dry We recommend you choose the programme best adapted to the type of load, avoiding using the prewash programme as far as possible. Fabric type Cotton/Linen white/fast colours heavy soil Cotton/Linen white heavy soil Cotton/Linen fast colours medium soil Cotton/Linen fast colours light soil Cotton/Linen delicate colours light soil Cotton/Linen Synthetic/cotton mix white/fast colours medium soil Synthetic/cotton mix delicate colours medium soil Synthetic/mix Synthetic/cotton mix delicate colours medium soil Synthetic/cotton mix delicate colours light soil Wool/wool mix white/colour light soil Wool/wool mix white/colour very light soil Cotton/linen white/colour very light soil Cotton/cotton mix synthetic/Delicate wool/wool mix (*) For wash and energy consumption programmes in accordance with Delicate wash, rinses, automatic additive absorption if required and short final spin Delicate wash, rinses, automatic additive absorption if required and short final spin WOOL wash, rinses, automatic additive absorption if required and short final spin NOTE: The consumptions in kW/h and litres and the programme durations may vary depending on the load type and size, water pressure, etc. B No spin Turn the spin speed selector to the "0" position to obtain a programme with no final spin, used to prevent particularly delicate fabrics from creasing. The wash programme stops on the last rinse, with the clothes left in water. When the function is deactivated, the washing machine continues the programme, draining and spin-drying. It is used, for example, when you are not at home and want to delay the spindrying until you get home, to prevent the clothes creasing after spin-drying and being left in the drum to be removed. To use it, turn the spin speed selector to the full tub stop position. This option, specially recommended for heavily soiled, stained clothes, achieves better results by extending the normal wash cycle. [. . . ] To clean the outside of the washing machine, use warm soapy water or a gentle cleaning product. You therefore need to wait around 2 minutes before you can open the door. Why doesn't the time remaining on the clock coincide with the real endof-cycle time selected? The time is for information purposes and it can be affected by the real conditions of the selected wash programme: the initial water temperature, the load of clothes, unbalance caused by the load on spin drying, etc. [. . . ]