User manual THUNDER TIGER TS-4N

[. . . ] appliance, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. If the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. If there is any doubt, have the electrical system of the house checked by a qualified electrician. ~ b) Before servicing or cleaning the ~ This appliance is intended for ~ This appliance complies with current safety requirements. [. . . ] Intensive setting Level "4" should only be used for short periods of time when frying or cooking food with a strong aroma. 11 Operation Turning off the fan s ^ Press the On/Off button to turn the fan off K. The K indicator goes out. Overhead lighting I The overhead lighting can be turned on and off independently of the fan. ^ Press the light button I briefly to turn on the lighting. Automatic Safety Shut-Off The fan will turn automatically off 10 hours of use. ^ Press the On/Off button K to turn the fan back on again. 12 Cleaning and Care , WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see "Important Safety Instructions". The following instructions for cleaning "Stainless steel" surfaces and "Stainless steel colored controls" should be followed in addition to the general "Cleaning the casing" instructions. Special instructions for stainless steel surfaces (not applicable to the controls) Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner. To help prevent resoiling, a conditioner for stainless steel can be applied. Special instructions for colored casings (Special order) It is very difficult to clean this type of surface without causing minor marks to the surface material. This can become particularly noticeable with darker colors and if there is halogen lighting in the kitchen. Stainless steel colored controls These controls may become discolored or damaged if not cleaned regularly. Do not use a stainless steel cleaner on these controls. Cleaning the casing Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. Please contact your local recycling center about the possibility of recycling these materials. Before discarding an old appliance, disconnect it from the electrical supply and cut off the power cord to prevent it from becoming a hazard. Ensure that any plastic wrappings, bags, etc. , are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! , DANGER 21 Appliance dimensions Drawing is not to scale. 22 Appliance dimensions a Ar extraction mode b Recirculation mode c Recirculation vent positioned at the top (recirculation mode only) d, e Installation area; For recirculation mode only d. Connection for air extraction mode 6" (150 mm), with reducing collar 5" (125 mm). 23 Appliance dimensions Distance between cooktop and hood (S) Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele Cooktops Electric Cooktops Electric Barbeques and Fryers Multiburner Gas cooktops < 43, 000 BTU (12. 6 KW) and no burner > 15, 000 BTU (4. 5 KW) Single burner (Wok) < 20, 500 BTU (6 KW) All other gas cooktops Non-Miele Cooktops 24" (610 mm) 26" (660 mm) 26" (660 mm) 26" (660 mm) 30" (760 mm) 30" (760 mm) 30" (760 mm) ­ If several gas surfaces are installed under the hood, the total output must be considered when determining the minimum safety distance. ­ Be sure to follow the minimum safety distances given by the gas cooktop manufacturer to easily flammable materials e. g. ­ If local building codes require a greater safety distance, follow their requirement. ­ If there is more than one appliance beneath the hood and they have different minimum safety distances always select the greater distance. See "Important Safety Instructions" for further information. ­ To ensure free access to work under the ventilation hood, a distance of a minimum of 26" (660 mm) above the electric cooktop is also recommended. ­ Take the user's body height into consideration when selecting the installation height. [. . . ] Installation, repairs and other work by unqualified persons could be dangerous. Ensure that power to the appliance is off while installation or repair work is performed. ^ Verify that the voltage, load and circuit rating information found on the data plate (located behind the grease filters), match the household electrical supply before installing the hood. ^ Use only with ventilation hood cord-connection kits that have been investigated and found acceptable for use with this model hood. [. . . ]