User manual TOSHIBA PORTEGE M780
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA PORTEGE M780. We hope that this TOSHIBA PORTEGE M780 user guide will be useful to you.
You may also download the following manuals related to this product:
TOSHIBA PORTEGE M780 (4900 ko)
TOSHIBA PORTEGE M780 (5875 ko)
TOSHIBA PORTEGE M780 (4900 ko)
TOSHIBA PORTEGE M780 (5186 ko)
TOSHIBA PORTEGE M780 (5155 ko)
TOSHIBA PORTEGE M780 (4852 ko)
TOSHIBA PORTEGE M780 (5098 ko)
TOSHIBA PORTEGE M780 (5333 ko)
TOSHIBA PORTEGE M780 (4872 ko)
TOSHIBA PORTEGE M780 (5287 ko)
TOSHIBA PORTEGE M780 (4803 ko)
TOSHIBA PORTEGE M780 (4908 ko)
TOSHIBA PORTEGE M780 (4833 ko)
TOSHIBA PORTEGE M780 (4901 ko)
TOSHIBA PORTEGE M780 (5912 ko)
TOSHIBA PORTEGE M780 (4894 ko)
TOSHIBA PORTEGE M780 (4814 ko)
Manual abstract: user guide TOSHIBA PORTEGE M780
Detailed instructions for use are in the User's Guide.
[. . . ] To select the different values for each field, press the [Spacebar] or [+] to change to the next higher selection and [F5] or [-] to go to the next lower selection. Pressing the [F9] key resets all items in the BIOS to the default values. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. Pressing the [F1] key gives you a general help screen.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following: 1. [. . . ] When Always Disabled is selected, the internal pointing device cannot be used.
11
LifeBook P Series BIOS
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
Main
Advanced
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help
Video Features Display Compensation: [Internal Flat Panel] [Enabled]
Select display terminal.
F1 Help ESC Exit
Select Item Select Menu
-/Space Change Values Enter Select Sub-Menu
v
F9 Setup Defaults F10 Save and Exit
Figure 6. Video Features Submenu
Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Display:
Options
· Internal Flat-Panel · External · Simultaneous · Disabled · Enabled
Default
[Internal Flat-Panel]
Description
Selects where the video signal will be routed.
Compensation:
[Enabled]
Enables or disables compensation which controls spacing on the display. When enabled, displays with less than pixel resolution 800 x 600 will still cover the entire screen.
12
Advanced Menu
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configurations submenu allows the user to configure other internal devices.
PhoenixBIOS Setup Utility Security Power Savings
Main
Advanced
Exit Item Specific Help
Internal Device Configurations
IDE Controller: LAN Controller:
[Both] [Auto]
[Disabled] No IDE ports are enabled. [Both] Both primary and secondary ports are enabled.
F1 Help ESC Exit
Select Item Select Menu
-/Space Change Values Enter Select Sub-Menu
v
F9 Setup Defaults F10 Save and Exit
Figure 7. Internal Device Configurations Submenu
Table 7: Fields, Options and Defaults for the Internal Device Configurations Submenu of the Advanced Menu
Menu Field
IDE Controller:
Options
· Disabled · Primary · Both · Disabled · Enabled · Auto
Default
[Both]
Description
Enables or disables selected IDE devices.
LAN Controller:
[Auto]
Enables or disables LAN controller.
13
LifeBook P Series BIOS
PCI Configurations Submenu of the Advanced Menu
The PCI Configurations submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to enable or disable built in PCI device modules.
Main
Advanced
PhoenixBIOS Setup Utility Security Power Savings
Exit Item Specific Help
PCI Configurations
v
IRQ Reservation Reserve specific IRQs for use by legacy ISA devices.
F1 Help ESC Exit
Select Item Select Menu
-/Space Change Values Enter Select Sub-Menu
v
F9 Setup Defaults F10 Save and Exit
Figure 8. PCI Configurations Submenu
Table 8: Fields, Options and Defaults for the PCI Configurations Submenu of the Advanced Menu
Menu Field
IRQ Reservation
Options
--
Default
--
Description
Reserve specific IRQs for use by legacy ISA devices.
14
Advanced Menu
IRQ Reservation Submenu of the PCI Configurations Submenu
The IRQ Reservation submenu of the PCI Configurations submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices.
Main
Advanced
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help
IRQ Reservation
IRQ IRQ IRQ IRQ IRQ IRQ IRQ
3: 4: 5: 7: 9: 10: 11:
[Available] [Available] [Available] [Available] [Available] [Available] [Available]
Reserve the specified IRQ for use by legacy ISA devices.
F1 Help ESC Exit
Select Item Select Menu
-/Space Change Values Enter Select Sub-Menu
v
F9 Setup Defaults F10 Save and Exit
Figure 9. IRQ Reservation Submenu
Table 9: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu
Menu Field
IRQ 3:
Options
· Available · Reserved · Available · Reserved · Available · Reserved · Available · Reserved · Available · Reserved · Available · Reserved · Available · Reserved
Default
[Available]
Description
Reserves IRQ 3. If Reserved is selected, BIOS reserves IRQ 3 for use by legacy ISA devices and does not use it for embedded PCI/ISA devices. Reserves IRQ 11.
IRQ 4: IRQ 5: IRQ 7: IRQ 9: IRQ 10: IRQ 11:
[Available] [Available] [Available] [Available] [Available] [Available]
15
LifeBook P Series BIOS
CPU Features Submenu of the Advanced Menu
The CPU Features submenu configures certain features of the CPU in the system.
Main
Advanced
PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help [Disabled] Configures Processor Serial Number feature. [Enabled] Processor Serial Number feature is enabled.
CPU Features Processor Serial Number:
F1 Help ESC Exit
Select Item Select Menu
-/Space Change Values Enter Select Sub-Menu
v
F9 Setup Defaults F10 Save and Exit
Figure 10. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. --
--
Clear
Set Supervisor Password
--
[Enter]
Set User Password
--
[Enter]
Minimum User Password Length: Password on Boot:
--
[0]
· Disabled · First Boot · Every Boot · Disabled · Enabled
[Disabled]
When set to Disabled, no password is required. When set to First Boot, password entry required only before first boot. When Every Boot is selected, password required whenever the system is booted. When Enabled, PS/2 keyboard and mouse inputs are locked out upon Resume From Suspend or Save-to-Disk until entering password. When Supervisor Only is selected, only the Supervisor can boot from removeable media. Only the user who enters the Supervisor Password before OS boot is treated as the Supervisor. When Supervisor Only is selected, only the Supervisor can access the floppy disk. Only the user who enters the Supervisor Password before OS boot is treated as the Supervisor. When All is selected, floppy disk access is not restricted.
Password On Resume:
[Disabled]
Boot from Removable Media:
· All · Supervisor only
[All]
Floppy Disk Access:
· All · Supervisor only
[All]
Hard Disk Security: Owner Information: Hard Disk Boot Sector:
-- -- · Normal · Write Protected
-- -- [Normal]
Configures hard disk security features. [. . . ] Follow the instructions for Navigating Through the Setup Utility to make any changes. The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.
Main
Advanced
PhoenixBIOS Setup Utility Security Power Savings Boot Item Specific Help
Quick Boot: Boot Time Diagnostic Screen: Preboot Execution Environment Boot Device Priority
[Enabled] [Disabled] [Disabled] [Disabled] All diagnostic tests will be done. [Enabled] Some diagnostic tests may be skipped while booting to speed up. [Auto] Diagnostic tests will be automatically skipped or done according to the order of the ACPI OS.
F1 Help ESC Exit
Table 18: Fields, Options and Defaults for the Boot Menu
Menu Field
QuickBoot Mode:
v
Select Item -/Space Change Values Enter Select Sub-Menu Select Menu
Figure 18. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA PORTEGE M780
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA PORTEGE M780 will begin.