User manual TRISTAR FO-1105

[. . . ] Always place the machine in a well ventilated area and on a coaster to prevent damage to the table. 2) with the desired ingredients (in this manual are some great recipes). 5) lights up, if the temperature is reached the control light goes out. [. . . ] Cleaning the device First remove the plug from the socket and allow all the parts to cool down before cleaning them. Never use harsh and abrasive cleaners, steel wool or a scouring pad as this will damage the device. 2) week in warm water and remove the remains with a dishwashing brush. To protect against electric shock, do not immerse cord, plug or appliance in water or any other liquid. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries and invalidate any warranty you may have. Do not use outdoors, or on or near direct heat sources Do not let cord hang over edge of table or counter, or touch hot surfaces or come into contact with the hot parts or allow the product to be situated underneath or close to curtains, window coverings etc. This appliance is for household use only and only for the purpose it is made for. This appliance is an attended appliance, and as such should never be left ON or whilst hot without adult supervision. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This device is not intended for use with an external timer or a remote control system. Note: To avoid danger by the accidental resetting thermal protection, the device may not be powered through an external switching device, such as a timer, or connected to a circuit and is turned regularly by the subject. This device is not intended for use with an external timer or a remote control system. Note: To avoid danger by the accidental resetting thermal protection, the device may not be powered through an external switching device, such as a timer, or connected to a circuit and is turned regularly by the subject. a damaged cord or plug must be replaced by an authorized technician to avoid a hazard. sAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE 10 Guarantee  The device supplied by our Company is covered by 24 month guarantee starting on the date of purchase (receipt).  During the life of the guarantee any fault of the device or its accessories to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. [. . . ] Product This device is equipped with a mark according to European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring that the product correctly as waste is processed, it helps you may have adverse consequences for the environment and human health. EC declaration of conformity This device is designed, manufactured and marketed in accordance with the safety objectives of the Low Voltage Directive "No 2006/95/EC, the protection requirements of the EMC Directive 2004/108/EC "Electromagnetic Compatibility" and the requirement of Directive 93/68/EEC. [. . . ]