User manual UNI-T DT 832

[. . . ] Other products may be trademarks or registered trademarks of their respective manufacturers. Trademarks Safety Instructions and Approval Safety Instructions Read the installation guide thoroughly before you set up the router. The router is a complicated electronic unit that may be repaired only be authorized and qualified personnel. The router should be used in a sheltered area, within a temperature range of +5 to +40 Celsius. The housing and electronic components may be damaged by direct sunlight or heat sources. [. . . ] To add, edit or delete the class rule, please click the Edit link of that one. After you click the Edit link, you will see the following page. In this case, "Test" is used as the name of Class Index #1. Vigor2820 Series User's Guide 115 For adding a new rule, click Add to open the following page. ACT Local Address Remote Address Edit Check this box to invoke these settings. Click the Edit button to set the local IP address (on LAN) for the rule. Click the Edit button to set the remote IP address (on LAN/WAN) for the rule. It allows you to edit source address information. Address Type ­ Determine the address type for the source address. For Range Address, you have to fill in Start IP address and End IP address. For Subnet Address, you have to fill in Start IP address and Subnet Mask. DiffServ CodePoint All the packets of data will be divided with different levels and will be processed according to the level type by the system. Please assign one of the levels of the data for processing with QoS control. It determines the service type of the data for processing with QoS control. You can choose the predefined service type from the Service Type drop down list. If you choose Custom, you can modify the domain that is chosen in the Domain Name field. Type in the password that you set for applying domain. Domain Name Login Name Password 4. Click OK button to activate the settings. You will see your setting has been saved. The Wildcard and Backup MX features are not supported for all Dynamic DNS providers. Disable the Function and Clear all Dynamic DNS Accounts 120 Vigor2820 Series User's Guide In the DDNS setup menu, uncheck Enable Dynamic DNS Setup, and push Clear All button to disable the function and clear all accounts from the router. Delete a Dynamic DNS Account In the DDNS setup menu, click the Index number you want to delete and then push Clear All button to delete the account. 3. 8. 2 Schedule The Vigor router has a built-in real time clock which can update itself manually or automatically by means of Network Time Protocols (NTP). As a result, you can not only schedule the router to dialup to the Internet at a specified time, but also restrict Internet access to certain hours so that users can connect to the Internet only during certain hours, say, business hours. In System Maintenance>> Time and Date menu, press Inquire Time button to set the Vigor router's clock to current time of your PC. You can inquiry an NTP server (a time server) on the Internet to synchronize the router's clock. This method can only be applied when the WAN connection has been built up. Set to Factory Default Index Status Clear all profiles and recover to factory settings. Click the number below Index to access into the setting page of schedule. Display if this schedule setting is active or inactive. You can set up to 15 schedules. [. . . ] As to the examples for other operation systems, please refer to the similar steps or find support notes in www. draytek. com. Go to Control Panel and then double-click on Network Connections. 2. Right-click on Local Area Connection and click on Properties. 3. Select Internet Protocol (TCP/IP) and then click Properties. 254 Vigor2820 Series User's Guide 4. Select Obtain an IP address automatically and Obtain DNS server address automatically. For MacOs 1. On the Network screen, select Using DHCP from the drop down list of Configure IPv4. Vigor2820 Series User's Guide 255 5. 3 Pinging the Router from Your Computer The default gateway IP address of the router is 192. 168. 1. 1. For some reason, you might need to use "ping" command to check the link status of the router. [. . . ]