User manual VANTAGE HD 8000S

[. . . ] MANUAL HD 8000S Safety Instructions This product has been manufactured to satisfy the international safety standards. Please read all of safety and operating instructions before operating the product and keep this manual for future reference. MAINS SUPPLY AC 90-250V~, 50/60Hz Operate your product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. [. . . ] Position: changed position of the motor also applies to the directions for other satellites. - Calculate Positions: Confirm the Enable Limits/Disable Limits function pressing the OK button. 9 The method to position motor is selected on the Continuous / Step (Impulses) / Time (Seconds) menu, If you press the Arrow (/) button once on the Continuous mode, selected TP signal of the satellite is locked or the motor stops to move. On the Step (Impulses) mode, you can select steps (pulse) from 1 to 10. The motor changes its position according to the selected step if moved to the left or right (depending on the motor). On the Time (Seconds) mode, you can select time (seconds) from 1 to20. the motor changes its position according to the selected step if moved to the left or right (Depending on the motor). If you have a MOTEK motor please use positioned menu instead of DiSEqC 1. 2. to make sure that your motor is working correct. English 25 Chapter 5 >> Main Menu Installation Installation >> Tuner (1 or 2) >> Auto Scanning Auto Scanning If you select the satellite to scan channel according to the antenna setting, your receiver can automatically scan the satellite without entering any other information. 1 Select Auto Scanning using the Arrow (/) buttons on the Installation menu and press the OK button. 2 Select satellite to scan channels by using the Arrow (/) buttons and select scan mode (All, Free or NIT) using the Arrow (/) button. After Auto Scanning completes, you can see TV and Radio channels in the list. Installation >> Manual Scanning Manual Scanning You can scan channels of the selected satellites by transponders if you know the transponder information. 1 Select Manual Scanning using the Arrow (/) buttons on the Installation menu and press the OK button. Satellite: Select a satellite by using the Arrow(/ /)buttons or Page (+/-) buttons. Select a transponder using the Arrow (/) buttons. 26 English Chapter 5 >> Main Menu Installation If you cannot find your desired transponder, select New to change transponder information as follows: · Frequency Display the selected TP Frequency. · FEC (Forward Error Correction) Select a FEC option Auto, 1/2, 2/3, 3/4, 5/6, and 7/8 using the Arrow buttons. · Polarity Select a polarity value among Horizontal, Vertical, Circular Left, and Circular Right using the Arrow buttons. A transponder receives and transmits incoming signals with in a prescribed frequency range. After receiving the signals the transponder will broadcast those signals with different frequencies. Scan Mode Decide whether to find free channels only or all the channels including scrambled ones. NIT Search You will be asked whether to search channels for another transponder. PID Search You can manually scan channels by entering individual Packet Identifier (PID) values. [. . . ] OSD: On Screen Display Is a graphical menu on the screen that allow you to control and setup your Receiver. One can control it by using a remote control or control buttons at the front display of your STB. HighDefinitionTelevision: (High-definition television (HDTV) is a digital television broadcasting system with higher resolution than traditional television systems (SDTV) . HDTV is digitally broadcast because digital television (DTV) requires less bandwidth if sufficient video compression is used English 53 Glossary RGB: The RGB color model is an additive color model in which red, green, and blue light are added together in various ways to reproduce a broad array of colors. [. . . ]